Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (49)
- Buch (Monographie) (29)
- Wissenschaftlicher Artikel (4)
- Teil eines Buches (Kapitel) (2)
- Bericht (2)
Schlagworte
- Simulation (86) (entfernen)
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Autobahnfahrbahnen aus unbewehrtem Beton sind durch Quer- und Längsfugen in Plattenelemente mit Standardmaßen unterteilt, wobei die Abmessungen auf Erfahrungswerten beruhen. Im Zuge des Forschungsprojektes wurde das Schwingungs- und Verformungsverhalten einer Betonfahrbahnplatte untersucht, um so Erkenntnisse über das dynamische Verhalten einer Betonfahrbahnplatte unter Verkehr zu erlangen. Zu diesem Zweck wurde eine neuartige Messstelle mit Beschleunigungssensoren zur Erfassung der Plattenbewegung errichtet. Einsenkungsdaten der Platte wurden durch Integration der Beschleunigungswerte bestimmt. Zunächst konnten bei der Auswertung der gemessenen Daten wertvolle Empfehlungen für Verbesserungsmöglichkeiten der Messeinrichtung bezüglich Auswahl, Anzahl, Platzierung der Sensoren, Ausführungsdetails und zweckmäßigerweise zusätzlich zu installierender Messsysteme gewonnen werden. Nach Analyse der Messdaten hinsichtlich Einsenkung und spektraler Leistungsdichte konnte festgestellt werden, dass ein harmonisches Schwingungsverhalten oder ein Nachschwingen der Platte durch die starke Dämpfung des Systems ausgeschlossen werden kann. Des Weiteren wurde ein FE-Modell der Betonplatte mit den realen Abmessungen und Stoffkennwerten erstellt und nach dem Verfahren von Westergaard sowie anhand der Messwerte kalibriert. An diesem können Variationen von Länge, Breite und Höhe der Platte berechnet und das Verhalten bei Überfahrt eines Lkw untersucht werden. Hierbei zeigte sich ein dominanter Einfluss des Untergrundes auf das Schwingungs- und Verformungsverhalten der Betonfahrbahnplatte. Bei Variationen der Plattenlänge konnte ein Einfluss der Länge auf die Relativbewegung in der Fuge ermittelt werden. Hier ist besonders bei Längen von mehr als 5 m eine starke Zunahme zu bemerken. Durch Betrachten des Plattenverhaltens beim Lastübergang zwischen den Platten konnte die Theorie des Pumpens und der dadurch verursachten Stoffumlagerung bestätigt werden.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
Ziel dieser Arbeit war die Entwicklung eines numerischen Modells des menschlichen knöchernen Thorax, das insbesondere altersabhängige geometrische Faktoren berücksichtigt. Dieses Modell soll sowohl die männliche als auch die weibliche Population der über 64-Jährigen repräsentieren und eine an diese Altersgruppe angepasste Verletzungssimulation ermöglichen. Die vorliegende Studie identifiziert zunächst an Hand eines Kollektivs aus 126 postmortem und 40 klinischen computertomografischen Schnittbildaufnahmen eine ganze Reihe geometrischer Parameter, die sich mit dem Alter verändern. Zu den untersuchten Parametern gehören sowohl Winkel der Rippen im Raum und innerhalb des Rippenbogens, eine detaillierte Erfassung von Parametern der einzelnen Rippe (Querschnittsfläche, Krümmung, Longitudinale Verdrillung), Parameter der Wirbelsäule als Ganzes (Skoliose, Kyphose, Rotation) und einzelner Wirbel sowie des Brustbeins. Weiterhin wurden die Grundmasse des ganzen Thorax (Thoraxtiefe, Thoraxbreite) untersucht. Die hier gefundenen Altersabhängigkeiten dienten als Eingabeparameter zur Erstellung von insgesamt neun aus dem Menschmodell THUMS 3 gemorphter alter und junger Finite-Elemente Thoraxmodelle. Implementiert wurden hierbei sowohl Durchschnittsmaße als auch extreme Maße. Die Ergebnisse zeigen mehrere sich im Alter signifikant verändernde Parameter. Als wichtigste unter ihnen sind eine Zunahme der Thoraxtiefe und Thoraxbreite im Alter, die signifikante Veränderung einiger Rippenwinkel im Raum sowie der Krümmung der sechsten und siebten Rippe zu nennen. Zudem wird die Wirbelsäulenform kyphotischer und das Sternum am Übergang zwischen Manubrium und Corpus sternii gewinkelter. Die Menschmodelle THUMS 3, THUMS 4 und HUMOS 2 sind weder als typisch alt, noch typisch jung einzuordnen, dies unterscheidet sich teils von Parameter zu Parameter. Die auf Basis der Geometrie-Inputdaten durchgeführten Finite-Elemente Simulationen zeigen einen deutlichen Einfluss der zunehmenden Thoraxtiefe im Alter auf die posteriore Kraft an der Auflagefläche der Rippen sowie die Spannungsverteilung entlang der Rippen. Sie wirkt sich jedoch entgegen der Erwartungen protektiv aus und dominiert andere Faktoren wie die unterschiedlichen Rippenwinkel. Abschließend betrachtet wird ein Menschmodell, welches das 75. Perzentil der alten Bevölkerung repräsentiert, als ausreichend aussagekräftig hinsichtlich der im Alter veränderten Geometrie klassifiziert und gleichzeitig als mit angemessenem Aufwand realisierbar angesehen. Es wird daher für die Bewertung von Sicherheitssystemen empfohlen.
APT with the mobile load simulator MLS10 towards non-destructive pavement structural analysis
(2019)
In 2014 a research program has been started about non-destructive test methods to evaluate the structure of pavements. This task has been given to two research groups - first research group is led by RWTH Aachen University (Rheinisch-Westfälische Technische Hochschule) and the second by University of Siegen. This paper focuses on the initial findings of the running research program. The assessment of the existing infrastructure and its condition will be one of the main tasks during the next years in order to use the available budget for maintenance accurately and efficiently. Therefore, it is necessary to identify possible damages and examine their effects on the road construction. BASt (Federal Highway Research Institute) is using the Mobile Load Simulator MLS10 for accelerated pavement testing (APT) on different types of pavements. In addition to non-destructive test methods, sensors are applied to measure structural impacts. The overall objective of this research program is to develop a non-destructive test method that allows the calculation of the remaining life time and load cycles of pavements. To simulate realistic wheel loads in a short period of time the MLS10 on German full scale standard pavement constructions has been used. The first pavement test section was loaded with 3 x 10 high 6 50 kN wheel loads while the second, thinner pavement test section was loaded with 3 x 10 high 5 50 kN wheel loads. Both loads are equivalent to the pavement design load. Three different strategies have been used to analyze and monitor structural changes. The innovative measurements have been realized by the two research groups to collect data for their models. The RWTH Aachen collected data with twelve geophones aligned in a row parallel to the wheel path. The geophones measure the entire vertical deflection basin of the pavement surface that exists due to the passing real truck wheels. These measurements were done for different truck speeds and at different transverse distances to the wheel path. The University of Siegen collected data by using acceleration sensors on the surface of the road construction. After recording the data they were integrated into displacement signals and evaluated. Additionally to those measurements BASt used conventional equipment to monitor the pavement structure and surface characteristics. The measurements and evaluation tools used for the innovation program have a high potential to validate APT programs in the future. Based on this research it is possible to start further research activities to push the non-destructive evaluation of pavements structures - not only in APT - into an improved direction.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
Hauptverkehrsstraßen sind in der Regel Bestandteil überörtlicher Straßennetze, bilden aber gleichzeitig auch wichtige städtebauliche und stadtverkehrliche Achsen und befinden sich somit in einem Spannungsfeld zwischen den Funktionen aus dem Verbindungsbedarf von Orten und Ortsteilen und der Erschließungsfunktion aus dem städtebaulichen Zusammenhang mit angrenzenden baulichen und sonstigen Umfeldnutzungen. Für die Netzkapazität sind in erster Linie die Knotenpunkte gleichrangiger Hauptverkehrsstraßen maßgebend, da hier Straßen mit gleicher Verbindungsbedeutung und entsprechend hohen Verkehrsstärken zusammentreffen. Die Qualität des Verkehrsablaufs auf den Streckenabschnitten zwischen diesen Knotenpunkten ist dagegen in starkem Maße durch die im Straßenraum jeweils festzustellenden Nutzungsbilder geprägt. Die Verkehrs- und die Verbindungsqualität innerörtlicher Hauptverkehrsstraßenzüge und damit auch -netze sind somit nicht nur von den Knotenpunkten, deren Abständen sowie dem Ausbau und der lichtsignaltechnischen Steuerung (besonders bedeutsam ist in diesem Zusammenhang deren Koordinierungsqualität), sondern auch von den dazwischen liegenden Streckenabschnitten und deren Erschließungsfunktion abhängig. Zielsetzungen dieses Forschungsvorhabens sind zum einen die Erarbeitung differenzierter Qualitätsstufenkonzepte für den Kraftfahrzeug- und den Stadt-/Straßenbahnverkehr zur Bewertung des Verkehrsablaufs auf Streckenabschnitten von Hauptverkehrsstraßen mit straßenbündigen Bahnkörpern (Teil 1) und zum anderen die Ermittlung eines Verfahrens zur Bestimmung der Verkehrs- und Verbindungsqualitäten in städtischen Hauptverkehrsstraßenzügen unter Berücksichtigung der Verkehrsqualitäten der Einzelanlagen und eventueller Netzeffekte (Teil 2). Im hier vorliegenden Teil 1 wird das bereits in vorhergehenden Forschungsvorhaben entwickelte Verfahren zur Bewertung der Kraftfahrzeugverkehrsqualität in Streckenabschnitten auf Abschnitte mit straßenbündigen Bahnkörpern erweitert. Des Weiteren wird ein Verfahren zur Bewertung des Stadt-/Straßenbahnverkehrsablaufs auf Mischverkehrsstrecken entwickelt. Die Verfahren erlauben unterschiedliche Entwurfsvarianten sowie verkehrsorganisatorische Maßnahmen in Streckenabschnitten im Zuge der Neu- bzw. Umgestaltung von Hauptverkehrsstraßen hinsichtlich ihrer Auswirkungen auf die Verkehrsqualität zu bewerten. Die Ergebnisse dienen als Grundlage zur Fortschreibung des HBS, die für das Jahr 2009 vorgesehen ist. Gleichzeitig stellen sie einen erforderlichen Input für die Bearbeitung des Teils 2 dar, da erst mit dieser Ergänzung alle relevanten Fahrbahnquerschnitte städtischer Hauptverkehrsstraßen abgedeckt sind, die eine entsprechend umfassende übergreifende Betrachtung des Verkehrsablaufs erlaubt. Der Originalbericht enthält als Anhänge die Geschwindigkeitsprofile der empirisch untersuchten Straßen (Anhang. 1), die Überprüfung des Bestimmungsverfahrens der Einflussbereiche von Knotenpunkten (Anhang 2), Bewertungs- und Simulationsergebnisse (Anhang 3 und 4) sowie zusätzliche Diagramme zur Ermittlung der Qualität des Kraftfahrzeug- und des Stadt- /Straßenbahnverkehrsablaufs (Anhang 5). Auf die Wiedergabe dieser Anhänge wurde in der vorliegenden Veröffentlichung verzichtet. Sie liegen bei der Bundesanstalt für Straßenwesen vor und sind dort einsehbar. Verweise auf die Anhänge im Berichtstext wurden zur Information des Lesers beibehalten.
Um das oft komplexe Zusammenwirken von einzelnen betriebstechnischen Einrichtungen zur Detektion von Brandereignissen und Steuerung der Lüftung sowie den übrigen sicherheitstechnischen Systemen überprüfen zu können, werden nach ZTV-ING im Rahmen der Abnahme Funktionsprüfungen gefordert, indem Brände simuliert und die zu prüfenden Größen messtechnisch erfasst werden. Reale Brandversuche in Straßentunnel sind jedoch unter dem Aspekt der Wirtschaftlichkeit und des notwendigen technischen Aufwandes zur Erfassung der interessierenden Branddaten und zum Schutz der betriebstechnischen Einrichtungen sowie des Bauwerkes in der Anzahl der Szenarien wie in der Energiefreisetzung begrenzt. Die unter vertretbarem Aufwand erreichbare Brandleistung beträgt zirka 5 MW. Um dennoch Aussagen über das Verhalten des Systems bei höheren Brandleistungen und unterschiedlichen, realen Randbedingungen (Brandorte, Verkehrsbelegung, Windverhältnisse und so weiter.) zu erhalten, sollten Simulationsrechnungen durchgeführt werden können. Diese erlauben eine sehr flexible Modellierung des Tunnels und die Ermittlung sämtlicher relevanter Größen an beliebigen Punkten im Untersuchungsgebiet. Da die Randbedingungen sehr tunnelspezifisch sein können, sind zur Kalibrierung entsprechender Rechenprogramme Eingangswerte aus standardisierten Brandversuchen hilfreich. Ziel der Untersuchung war es daher, mit Hilfe eines geeigneten Rechenprogramms Anforderungen an einen Brandversuch hinsichtlich der notwendigen Daten zur Funktionsüberprüfung und zur Brandhochrechnung zu definieren. Zur Durchführung der Simulationsrechnungen wurde der "Fire Dynamics Simulator" (FDS) verwendet, der über das National Institute of Standards and Technology als 0pen Source-Rechenprogramm erhältlich ist. Grundlage des Rechenprogramms bilden die Gleichungen für die Massen-, Impuls-, Energie- und Stofferhaltung, die im 3-dimensionalen Raum numerisch gelöst werden und als Ergebnis Geschwindigkeits-, Temperatur- und Konzentrationsfelder bereitstellen. Im Rahmen dieser Untersuchung wurden verschiedene Versuchsreihen des Memorial-Tunnel-Fire-Ventilation-Test-Program (MTFVTP) zur Verifizierung der Rechenergebnisse herangezogen. Die vergleichende Gegenüberstellung der einen Brand charakterisierenden Größen Geschwindigkeit und Temperatur ergaben eine überwiegend gute Übereinstimmung der Messwerte aus den Brandversuchen mit den Simulationsergebnissen. Basierend auf den Berechnungen zu den Temperatur- und Geschwindigkeitsverteilungen wurden schließlich unter den Aspekten der Funktionsüberprüfung der betriebstechnischen Einrichtungen und der Erfassung von Eingangsgrößen für Simulationsrechnungen Anforderungen zur Versuchsanordnung, Branddauer, Brandgut und Erfassung der relevanten Messgrößen im Längs- und Querschnitt sowie Anforderungen zu Schutzvorkehrungen abgeleitet. Die Untersuchung hat gezeigt, dass die Definition "eines" Standardbrandversuchs nicht zweckmäßig ist, da die Zielsetzungen sich zu sehr unterscheiden. Dagegen konnten konkrete Grundlagen und Empfehlungen zur Festlegung standardisierter Brandversuche für die gemäß RABT und ZTV-ING vorgesehenen Funktionstests erarbeitet werden. Außerdem konnte gezeigt werden, dass das für die Simulationsrechnungen verwendete Programm FDS derzeit ein adäquates Instrument bildet, nicht nur bezüglich der Simulation von Tunnelbränden unter realen Gegebenheiten und der resultierenden Strömungs- und Temperaturverhältnissen sowie Rauchkonzentrationen, sondern auch in Bezug auf die benötigte Rechner- und Speicherkapazität.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
Real world accident reconstruction with the Total Human Model for Safety (THUMS) in Pam-Crash
(2013)
Further improvement of vehicle safety needs detailed analysis of real world accidents. According to GIDAS (German In-Depth Accident Study) most car to car front accidents occur at mid-crash severity. In this range thoracic injuries already occur. In this study a real world frontal crash with mid-crash severity out of the AARU database was reconstructed. The selected car to car accident was reconstructed by AARU by means of pc-crash software in order to get the initial dynamic accident conditions. These initial conditions were used to reconstruct the complete accident in more detail using FE models for the car structure and the occupants. Occupant simulations were performed with FE HIII-dummy models and the THUMS using Pam-Crash code. An initial THUMS validation was performed in order to verify the model-´s biofidelity by means of table-top test simulations. THUMS bone stiffness values were modified to match the real word occupant age. A comparison between driver and passenger restraint system loading was done, as well as an injury prediction comparison between the HIII-dummy model and THUMS response for both cases. Detailed comparison between the HIII-dummy models and THUMS regarding thoracic loading are discussed.