Sonstige
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Die Verordnungsgeber haben länderübergreifende Normen und Vorschriften für die Durchführung und Auswertung von Crashversuchen mit Personenkraftwagen bei verschiedenen Aufprallarten entwickelt, die im Rahmen der Entwicklung und Zulassung neuer Fahrzeuge Anwendung finden. Verbraucherschutzorganisationen, Automobilclubs und Fachzeitschriften tragen mit der Durchführung und Publikation eigener Tests dazu bei, dass die passive Sicherheit von Personenkraftwagen in der breiten Öffentlichkeit mehr und mehr beachtet wird. Im Gegensatz dazu ist die Durchführung von Crashtests zur Untersuchung und Bewertung der passiven Sicherheit von Motorrädern relativ neu. Vor diesem Hintergrund hat die Bundesanstalt für Straßenwesen das vorliegende Forschungsprojekt vergeben. Hierbei waren unter Verwendung geeignet erscheinender Prüfverfahren reale Unfallsituationen nachzubilden. Unter Beachtung der Vielfalt der motorisierten Zweiräder mit ihrer Einteilung in verschiedene Zulassungs-Kategorien und zugehöriger Unfalldaten wurde das reale Unfallgeschehen analysiert. Neben Daten aus der amtlichen Unfallstatistik wurden dabei Informationen aus der Literatur und eigene Erhebungen ausgewertet. Ergänzend ist der aktuelle Kenntnisstand zur Biomechanik aufbereitet worden. Eine Beschreibung des Status quo der passiven Motorradsicherheit erfolgte unter Analyse der hierbei relevanten Elemente, Baugruppen und Eigenschaften des Motorrades. Dazu gehören Lenker, Sitzbank, Fußrasten, Tank, Verkleidung, Airbag (noch nicht im Hersteller-Angebot), Vorderradgabel und Standrohre sowie die Aufsassen-Kopfhöhe. Weiterhin gingen die Ergebnisse von Full-Scale-Crashtests, die im internationalen Standard ISO 13232 beschrieben sind, mit Anstößen von Motorrädern an der Seite von Personenkraftwagen in die Darstellung des Status quo der passiven Motorradsicherheit ein. Zusätzlich wurden im Rahmen des Forschungsprojektes Schlittenversuche durchgeführt. Ein zur Darstellung des rechtwinkligen Motorradanpralles an der Seite eines stehenden Personenkraftwagens geeigneter Schlitten ist im Rahmen des Projektes entworfen, realisiert und eingesetzt worden. In der Literatur beschriebene Motorrad-Sicherheitskonzepte und Vorschläge für besondere Motorrad-Sicherheitselemente sind ebenfalls dargestellt worden. Im Rahmen des Forschungsprojektes wurde ein umfassender Ansatz verfolgt. Er enthält die Bewertung von Sicherheitsmerkmalen, die aus technischen Beschreibungen entnommen und am stehenden Fahrzeug ermittelt werden können (Primärdaten) sowie die Ergebnisse von dynamischen Crash- und Schlittentests (Sekundärdaten). Dabei erfolgt stets die Orientierung am realen Unfallgeschehen (Tertiärdaten). Der internationale Standard ISO 13232 wird als geeigneter Ausgangspunkt eines umfassenden Prüf- und Bewertungsverfahrens für die passive Sicherheit motorisierter Zweiräder erkannt. Zur Erweiterung der bereits definierten Testverfahren werden Schlittentests vorgeschlagen. Außerdem werden Alleinunfälle des Motorrades zu beachten sein. Die Ergebnisse des Forschungsprojektes tragen dazu bei, die Aspekte der passiven Sicherheit von motorisierten Zweirädern zu objektivieren.
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
Traffic accidents were ranked the third among the major causes of death in Thailand. About 13,438 deaths and the death rate from traffic accident was 21.5 per 100,000 of population in 2002. The deaths and death rate varied upon the economic situation. After the economic crisis, traffic accidents were increased as well as the period of the bubble economy. In the Central region of Thailand numbers of road traffic crashes were lower than Bangkok Metropolis, but the highest in the number of deaths, death rate and serious injuries in 2002. Men aged 15"29 years old had higher numbers of deaths than men in other age groups and higher than women. Deaths and injuries from road traffic crashes were the highest in April and January, because there was a long weekend in those months. About 80 percent of road traffic crashes were caused by private car and motorcycle. In 2000 about 51 percent of traffic accidents took place on the straight way, followed by the junction and curves. In 2002, about 97 percent of road traffic crashes were caused by human factors including improper passing, speeding and disregarding to traffic signal, however, the identification of causes of traffic accident needed to improve. Drunk driving, disregarding on safety equipment usage, inefficiency of law enforcement and discontinuing of road safety programs were the deepest causes of traffic accidents. Research based information, a broad coalition of stakeholder and urban planning policy were needed to incorporate for a comprehensive road safety policy formulation and actions.
Portugal has the highest rate of road fatalities in Europe (2002 and for Eur-15 - CARE database). For this highest rate, the accidents involving pedestrians and motorcycle occupants have a higher contribution than the European average. In the last years, especially accidents involving motorcycles have been investigated and currently two different projects are being carried out, one related with motorcycles accidents and the other with pedestrian accidents. In these projects, countermeasures among others to reduce the fatalities between these two types of road users are being studied. These accidents are investigated with the commercial accident reconstruction software PCCRASH but also new methodologies based on multibody dynamics are in development in order to more accurately study these two types of accidents. In this paper, the methodologies in use for accident reconstruction and new methodologies in development are presented. Speeding his found to be one of the major causes of road fatalities for pedestrians and motorcycle occupants. In the case of motorcycle accidents, these involve mainly young drivers. Aspects as social behavior are also important to understand the causes of some of these accidents. Some examples of accidents occurring in Portugal, involving especially motorcycles and pedestrians are presented and discussed.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
Mit dem vorliegenden Bericht wird ein neuentwickeltes Curriculum zur Ausbildung motorisierter Zweiradfahrer in Fahrschulen vorgestellt. Zunächst werden der curriculare und verkehrspädagogische Ansatz, der dem Curriculum zugrunde liegt, sowie schon bestehende Curricula in der Fahrschul- und Fahrlehrerausbildung dargelegt und die grundlegenden Schritte der Curriculumentwicklung aufgezeigt. Eine Darstellung der geänderten gesetzlichen Rahmenbedingungen und der sich daraus ergebenden didaktisch-organisatorischen Überlegungen schließen sich an. Das aus 8 Lerneinheiten für die Theorie und 16 Lerneinheiten für die Praxis bestehende Curriculum wird anhand von drei Lerneinheiten exemplarisch vorgestellt. Die Erprobung des Curriculum fand in fünf Fahrschulen mit 50 Fahrschülern statt und sollte vor allem die Praktikabilität, Handhabbarkeit, Lehrzielerreichung und die Akzeptanz der verwendeten Methoden, Medien und Materialien überprüfen. Zusätzlich wurden einige in Richtung Wirksamkeitsuntersuchung gehende Variablen erhoben und ausgewertet. Bei der anschließenden Revision des Curriculum wurden die Lerneinheiten entsprechend den Erprobungsergebnissen modifiziert. Ein Rahmenplan für die Ausbildung von Motorradfahrern und Folgerungen für die Umsetzung des Curriculum auf breiter Basis, für die Fahrlehrerausbildung und für eine summative Evaluation des Curriculum schließen den Bericht ab.
Die Bundesanstalt für Straßenwesen hat das Fachgebiet Fahrzeugtechnik der Technischen Universität Darmstadt (fzd) damit beauftragt, die Bremsung des Motorradfahrers mit verschiedenen Kraftradbremssystemen zu untersuchen. Die Bremsung ist eines der am schwierigsten zu beherrschenden Motorradfahrmanöver. Dem Fahrer als Regler zweier unabhängig voneinander bedienbarer Bremskreise wird die Regelaufgabe zusätzlich erschwert durch die latente Sturzgefahr eines kreiselstabilisierten Einspurfahrzeugs. Hinzu kommen das ungünstige, die Gefahr eines Bremsüberschlags begünstigende Verhältnis von Schwerpunkthöhe zu Radstand und die meist hohen Bremskräfte bereits bei niedrigen Bedienkräften. Weitere fahrwerkabhängige Parameter wie die Lage des Nickpols beeinflussen den zeitlichen Ablauf der Radlastverschiebung während der für die Erzielung eines geringen Bremswegs besonders wichtigen Anfangsphase der Bremsung. Trotz dieser für den Fahrer als Regler ungünstigen Voraussetzungen hat sich am Grundkonzept der im größten Teil der Motorradpopulation verbauten Standardbremse mit getrennter Bedienung von Vorderrad- und Hinterradbremse seit Beginn des letzten Jahrhunderts nichts geändert. Aufgabe der vorliegenden Forschungsarbeit ist es, Anforderungen an Bremssysteme, mit denen der Motorradfahrer sichere Bremsungen mit kurzen Bremswegen reproduzierbar erreichen kann, zu formulieren. Dazu wurden Testpersonen Bremsaufgaben mit den fünf verschiedenen Bremssystemen Standard- und Kombibremse jeweils mit und ohne ABS sowie blockiergeschützte Kombibremse mit Einhebel-Bedienung gestellt und die erzielten Bremswege sowie Belastungs- und Beanspruchungsgrößen des Fahrers aufgezeichnet. Die Versuche zeigen folgende Ergebnisse: Die erzielten Bremswege sind mit ABS kürzer als ohne, was vor allem auf die Unterschiede in der Anfangsphase einer Bremsung zurückgeführt werden kann. Die während dieser Anfangsphase verstreichende Zeit steigt bei Bremsungen ohne ABS überproportional mit der Ausgangsgeschwindigkeit. Dies gilt auch und vor allem für die Kurvenbremsung. Ein signifikanter Unterschied zwischen Standard- und Kombibremse konnte nicht festgestellt werden. Die Bedienung einer blockiergeschützten Kombinationsbremse mit nur einem Bremshebel zeigt keinerlei Nachteil gegenüber einer konventionellen Zweihebel-Bedienung. Bei Bremsungen ohne ABS stieg die als Beanspruchungsgröße herangezogene Herzschlagfrequenz deutlich stärker an als bei Bremsungen mit ABS. Auch der Muskeltonus des Flexor Digitorum Superficialis, eine Belastungsgröße, liegt wie auch andere Belastungsgrößen aufgrund der mit einer höheren mentalen Beanspruchung einhergehenden Muskelanspannung bei Bremsungen ohne ABS deutlich höher als bei Bremsungen mit ABS. Die während des Versuchsbetriebs aufgetretenen Stürze fanden erwartungsgemäß nur bei Bremsungen ohne ABS statt. Es können folgende Empfehlungen für zukünftige Kraftradbremssysteme abgeleitet werden: ABS sollte bei Einspurfahrzeugen möglichst flächendeckend Verwendung finden; dabei kann es abschaltbar gestaltet werden. Beim Vorhandensein einer blockiergeschützten Kombibremse ist ein Bedienelement ausreichend; dies sollte der Handbremshebel sein. Eine Überschlagregelung blockiergeschützter Bremsen ist notwendig, bestehende Überschlagregelungen müssen verbessert werden. Der Originalbericht enthält als Anhang den Test zur Ermittlung der Fahrerfahrung. Auf die Wiedergabe dieses Anhanges wurde in der vorliegenden Veröffentlichung verzichtet. Der Test liegt bei der Bundesanstalt für Straßenwesen vor und ist dort einsehbar. Verweise auf den Anhang im Berichtstext wurden beibehalten.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.