Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (88)
- Buch (Monographie) (12)
- Arbeitspapier (1)
Volltext vorhanden
- ja (101) (entfernen)
Schlagworte
- Injury (101) (entfernen)
Institut
- Sonstige (101)
- Abteilung Fahrzeugtechnik (2)
The number of injuries sustained by car occupants involving the head, thorax, spine, pelvis and the upper limbs have been reduced significantly during recent years. This is probably due to better safety features in the cars, especially the availability and usage of safety belts, airbags etc. Therefore one can notice clinically a relative increase in survivors of severe frontal crashes, but many of them have injuries to the lower extremities. To verify this, we analyzed the foot and ankle injuries of front seat passengers.
Recently, EuroNCAP updated the upper legform test protocols. The main objective of this study is to establish the upper legform test in KIDAS (Korean In-depth Accident Study) taking into account domestic pedestrian accident data as well as anthropometric data to protect elderly pedestrians whose average height and weight is much smaller and lighter than other age groups, especially compared to Europeans. Therefore 230 cases of pedestrian accidents from KIDAS were investigated to explore the injury severity of body regions as well as age related injury patterns. Injuries of all body regions were examined, with a special focus on injuries of abdomen and pelvic area. On the other hand, in order to explore Korea's pedestrian accident environment, national police data and KIDAS (Korean In-depth Accident Study) data were compared. The results should be taken into account in future analyses and possible improvements, such as regulations and KNCAP test protocols, of the pedestrian safety policy in Korea.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
The bicyclist accidents were analyzed to get better understanding of the occurrences and frequency of the accidents, injury distributions, as well as correlation of injury severity/outcomes with engineering and human factors in two different countries of China and Germany. The accident cases that occurred from 2001 to 2006 were collected from IVAC database in Changsha and GIDAS database in Hannover. Based on specified sampling criteria, 1,570 bicyclist cases were selected from IVAC database in Changsha, and 1806 cases were collected from Hannover, documented in GIDAS database. Statistical analyses were carried out by using these selected data. The results from the statistical analysis are presented and discussed in this study.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
Die Elektromobilität ist nicht erst seit dem Nationalen Entwicklungsplan Elektromobilität der Bundesregierung, der u.a. als Zielsetzung hat, dass eine Million Elektrofahrzeuge bis 2020 auf deutschen Straßen fahren sollen, ein allgegenwärtiges Thema. Eine zu lösende Aufgabe auf dem Weg zu diesem Ziel ist die Betrachtung der Abhängigkeiten der Systeme Elektrofahrzeug, Ladeverbindungseinheit und Ladesystem, welche bisher weitgehend autonom normiert sind. Um Personen- und Sachschäden beim Laden von Fahrzeugen zu vermeiden, ist es möglicherweise erforderlich, Anforderungen an die Sicherheit dieses Gesamtsystems zu definieren. Zu diesem Zweck beauftragte die Bundesanstalt für Straßenwesen die SGS-TÜV Saar GmbH, Competence Center Funktionale Sicherheit mit der Durchführung einer Risikoanalyse, mit dem Ziel die Sicherheitsaspekte beim Laden eines Elektrofahrzeuges zu untersuchen. Bisher nicht bzw. unzureichend betrachtete Gefährdungen während des Ladevorganges sollten aufgezeigt werden. Nötige Maßnahmen sollten definiert und punktuell mittels Tests validiert werden, um identifizierte Risiken auf ein ausreichend geringes Maß zu senken. Im Kern wurde untersucht, welche potenziellen Risiken (Das Risiko definiert sich als die Beschreibung eines Ereignisses mit der Möglichkeit negativer Auswirkungen. Das Risiko wird allgemein als Produkt aus Eintrittswahrscheinlichkeit eines Ereignisses und dessen Konsequenz angesehen. (Quelle: Wikipedia)) beim Laden eines Elektrofahrzeugs auftreten. Auf Basis einer Normenrecherche wurde die Frage beantwortet, an welchen Stellen normativer und gesetzlicher Handlungsbedarf besteht. Dazu wurden die nachfolgenden Schwerpunkte erarbeitet: - Darstellung möglicher sicherheitskritischer Bedingungen beim Laden; - Zuordnung der sicherheitskritischen Bedingungen zu den Subsystemen Infrastruktur, Kabel und Fahrzeug; - Definition von Maßnahmen zur Erhöhung der Sicherheit beim Laden; - Aufzeigen der Zuständigkeiten für die Gewährleistung der Sicherheit; - Offenlegung des regelungsseitigen Bedarfs. Im ersten Schritt wurde eine Risikoanalyse durchgeführt, um die potenziellen Risiken beim Laden eines Elektrofahrzeugs aufzuzeigen. Die Risikoanalyse wurde zunächst ohne Berücksichtigung bereits normativ oder gesetzlich festgelegter Schutzmaßnahmen durchgeführt. Anschließend erfolgte eine iterative Weiterführung der Betrachtung der Risiken in zweierlei Hinsicht: a) Berücksichtigung existierender normativer und/ oder gesetzlicher Anforderungen, welche parallel zur Risikoanalyse recherchiert wurden; b) Beschreibung ergänzender technischer und/ oder organisatorischer Maßnahmen, um nicht abgedeckte Risiken weiter zu reduzieren. Danach wurde eine erneute Beurteilung der Risiken vorgenommen, um aufzuzeigen, ob die vorhandenen bzw. neu definierten Maßnahmen in der Lage sind, das identifizierte Risiko in ausreichendem Maß zu reduzieren. Generell zeigte sich im Rahmen der Risikoanalyse eine breite, durch Normen und Richtlinien bzw. gesetzlichen Regelungen, vorhandene Abdeckung der möglichen Risiken. Derzeit nicht abgedeckte Risiken konnten adressiert und wirksame Lösungsmöglichkeiten vorgeschlagen werden. Bei Umsetzung aller aufgezeigten Lösungsansätze bleiben somit keine relevanten Risiken offen. Jedoch zeigt sich auch, dass zu bestimmten Themen dringender Handlungsbedarf besteht. Als Ergebnis ließ sich zu folgenden Punkten ein konkreter Handlungsbedarf ableiten: - Als eines der Hauptrisiken wurde das Laden an einer haushaltsüblichen Schukosteckdose, ohne die Nutzung einer zusätzlichen in der Ladeleitung integrierten Schutzeinrichtung, identifiziert. Bei Ladeleitungen mit Schutzeinrichtung hängt deren Schutzwirkung nicht zuletzt von einer regelmäßigen technischen Überprüfung ab; - Als relevant wurden weiterhin die elektromagnetischen Felder, die von einer Ladeleitung bei hohen Strömen ausgehen (zukünftige Schnellladesysteme), identifiziert, hier sind tiefergehende Untersuchungen erforderlich; Im Sinne der Risikominimierung sollte auch das maximal zulässige Gewicht der Ladegarnitur limitiert sein; - Auch Risiken, die sich durch die Bedienung ergeben, wurden untersucht. Mit entsprechenden Hinweisen im Bedienungshandbuch des Elektrofahrzeuges kann hier bereits einigen möglichen Gefahren begegnet werden. Dies betrifft unter anderem die Handhabung der Ladegarnitur beim Laden im öffentlichen Raum. Aus den ermittelten, noch umzusetzenden Maßnahmen geht hervor, dass der derzeitige Stand der Normung und gesetzlichen Regelungen noch nicht vollkommen ausreichend ist, um alle ermittelten und aufgezeigten Risiken in ausreichendem Maße zu reduzieren. Aus den Ergebnissen der Studie wird aber auch deutlich, dass die Sicherheit nicht alleine von einem Teilsystem alleine, sondern vielmehr durch das sichere Zusammenwirken aller Teile, auch in Kombination mit dem Verhalten der Nutzer und partizipierender Personen, gewährleistet wird.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
Sedan type vehicles in which adult rear seat passengers were present and which were involved in frontal collisions were investigated, and the influence of unbelted rear seat passengers on the injuries of front seat occupants was studied. Unbelted rear seat passengers move forward during impact. It was observed that there were not only cases in which front seat occupants sustained injuries caused by direct contact with rear seat passengers, but also cases where front seat occupants received severe injuries due to additional force from rear seat passengers, either impacting directly or indirectly as a result of deformation of the front seat. Severe injuries of front seat occupants were observed in the latter cases. This research validates the importance of seat-belt use for rear seat passengers, not only to protect themselves but also to mitigate injuries of front seat occupants.