Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (50) (entfernen)
Schlagworte
- Datenbank (50) (entfernen)
Institut
- Sonstige (50)
- Abteilung Fahrzeugtechnik (1)
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Im Rahmen des 12-monatigen Forschungsprogramms "Intelligente Straßenverkehrsinfrastruktur durch 3D-Modelle und RFID-Tags", aufgesetzt von der Bundesanstalt für Straßenwesen, entwickelte die HOCHTIEF Solutions AG ein Konzept für ein Infrastruktur-Informationssystem. Ziel dieses Forschungsvorhabens war es, das bestehende System der öffentlichen Anstalt für den Betrieb und Erhalt von Brückenbauwerken, sowie die dazugehörigen Workflows mithilfe neuer Technologien zu optimieren. Das entwickelte Konzept für ein Infrastrukturinformationssystem ISIS, kurz für Intelligente StraßenverkehrsInfraStruktur, wurde als eine Schale um die bereits vorhandene Straßeninformationsbank-Bauwerke (SIB-BW) herum konzipiert. Alle Prozesse und Datenflüsse, die rund um diese Datenbank bestehen, bleiben damit unverändert. Zusätzliche Informationen und Dokumente, die an die vorhandenen Datensätze angefügt werden sollen, werden in dem neuen System abgelegt und mit dem Bestandsdatensatz verknüpft. Ziele: - Informationsbereitstellung optimieren, - 3D unterstützte Dokumentation des Bauwerksprüfprozesses, - Anlehnung an bestehende Prozesse, - Einbindung mobiler Endgeräte und Zustandssensoren. ISIS gründet sich auf folgende Komponenten: - Bauwerksmodelle: -- 2D-Platzhalter für Bestandsbauten, -- 3D-Modelle für Neubauten, - mobile Schadensaufnahme via mobiler Endgeräte, - Frühwarnsysteme auf Basis von RFID-Technologie (Feuchtigkeit und Korrosion), - 3D-Pins für die Markierung relevanter Punkte (RFID-Detektoren, Schäden, etc.), - Hardware mit hoher Verfügbarkeit und Akzeptanz (iPads). Um allen Beteiligten den Zugriff zu dem Informationssystem zu ermöglichen, wird das System zur Ausführung auf einer Online-Plattform konzipiert. Alle relevanten Informationen eines Straßenverkehrsinfrastrukturprojektes können in konsolidierter Form bereitgestellt werden. Die bisher dezentrale und inkompatible Datenhaltung in mehreren Teilsystemen wird unterbunden und eine einfache und durchgängige Nutzung des Datenbestandes in Planung, Bau und Betrieb wird ermöglicht. Um den Prozess der Bauwerksprüfung effizienter zu gestalten, sollen Informationen zum Bauwerkszustand mithilfe der 3D-Pin-Markierung und dem Einsatz von Radiofrequenz-Technologie (RFID) regelmäßig überprüft werden, um Bauwerksschäden frühzeitig erkennen zu können.
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
76 severe traffic accidents had been investigated in depth in an ongoing Volkswagen-Tongji University joint accident research project in JiaDing district, Shanghai, PR China since June 2005. With a methodology similar to German accident research units in Dresden and Hannover, a research team proceeds to the scene immediately after the incident to investigate and collect various data on environment, accident occurrence, vehicle state and deformations as well as injuries. The data combined with the results of accident reconstruction will be stored in a database for further statistical and casuistic analysis. The first outcome of the project supports the hypothesis that a main causation for the large number of traffic accidents in China is the lacking of risk awareness in Chinese driver behaviour. Low seat-belt use and the high proportion of vulnerable and poorly protected two-wheelers in traffic are reasons for the high injury and fatality rate in China. The research work shows that accident research in China is feasible and able to give support to tackle one of the urging problems in Chinese development.
Das Emissionsmodul des PC-Berechnungsverfahrens zur Abschätzung von verkehrsbedingten Schadstoffimmissionen (MLuS 02) basiert auf dem Handbuch für Emissionsfaktoren des Umweltbundesamtes. Aufgabe war die Berechnungen mit dem neuen Handbuch kompatibel zu machen. Die Aufgabenstellung gliederte sich in 3 Teile: i) Implementierung der neuen Version des Handbuchs in das Emissionsmodul , ii) Umwandlung des Emissionsmodul von ACCESS in Delphi, gleichzeitige Beseitigung von Inkonsistenzen in der Berechnung , iii) Implementierung des neuen Emissionsmoduls, Durchführung von Systemtests und Modifikationen, Aktualisierung des Merkblatts MLuS 02. Bei der Aktualisierung des Handbuches wurden folgende redaktionelle Änderungen vorgenommen: Herausnahme der 98-Perzentile - außer für das NO2 - im tabellarischen Ausdruck, Erstellung eines Installationsprogramms, Aktualisierung des Merkblatts MLuS 02 gemäß der vorgenommenen Fortschreibung. Im Vergleich zur vorherigen Version ergeben sich folgende Änderungen: Eingangsdaten und ihre Klassifizierung: Dem Emissionsmodul wurden bisher per ASCII-Schnittstelle die folgenden Eingangsdaten übergeben: Bezugsjahr, Gebiets-ID, Straßenkategorie-ID, Fahrbahnlängsneigungs-ID, Anzahl der Fahrspuren, DTV, DTV-ID, Lkw-Anteil, Lkw-Anteil-ID, Kraftstoffszenario-ID, Stop+Go-ID, Das Bezugsjahr wurde rückwirkend auf das Jahr 2000 begrenzt, so dass die Gebietsunterscheidung Ost/West entfallen kann. Längsneigungsklassen: Hinsichtlich der Längsneigungsklassen enthält das Modell die in Tabelle2 (siehe Längsneigungsklassen im Abschlussbericht) dargestellte Klassifizierung. Fahrzeugkategorien: Das Emissionsmodul unterscheidet intern folgende Fahrzeugkategorien: Pkw, Leichte Nutzfahrzeuge (Gesamtmasse bis 3,5 t), LNfz genannt, Schwere Nutzfahrzeuge (Gesamtmasse über 3,5 t), im folgenden SNfz genannt. Umwandlung des Emissionsmodul von ACCESS in Delphi: Nachdem die Änderungen im Emissionsmodul durchgeführt worden waren, wurden alle Visual Basic Codes von ACCESS nach Delphi verlagert. Implementierung des neuen Emissionsmoduls in das MLuS 02: Das Emissionsmodul wurde in das MLuS 02 Programm implementiert. Ruß wird aus dem MLuS entfernt (Außerkraftsetzung der 23. BImSchV).
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.