80 Unfallforschung
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (114)
- Buch (Monographie) (89)
- Wissenschaftlicher Artikel (39)
- Arbeitspapier (10)
- Bericht (2)
- Teil eines Buches (Kapitel) (1)
Schlagworte
- Deutschland (139)
- Germany (139)
- Unfall (134)
- Accident (133)
- Konferenz (101)
- Conference (100)
- Safety (79)
- Sicherheit (77)
- Unfallrekonstruktion (57)
- Vehicle (57)
Aus Erfahrungen mit Untersuchungen zum Einsatz ortsfester Anlagen zur Geschwindigkeitsüberwachung werden für die künftige Forschung einige Forderungen erhoben. Die Erkenntnisse aus der Forschung zur Verbesserung der Verkehrssicherheit durch bauliche oder verkehrstechnische Maßnahmen sollten zur Optimierung des Einsatzes solcher Anlagen genutzt werden. Es wird dafür plädiert zu untersuchen, welche Standorte beim Einsatz ortfester Anlagen eine möglichst linienhafte Wirkung zu erzielen in der Lage sind. Insgesamt wird die Erarbeitung eines Kriterienkatalogs angeregt, der den jeweiligen Entscheidungsträgern bei der Planung und Aufstellung der Anlagen behilflich sein kann. Da ortsfeste Anlagen eine lediglich ortsspezifische Geschwindigkeitsanpassung bewirken, wird die Kombination ortsfester mit mobilen Kontrollen auf Landstraßen empfohlen. Es sollte auch untersucht werden, ob die Verkehrsüberwachung durch ortsfeste Anlagen nicht nur ein Beitrag zur Reduzierung von Geschwindigkeiten darstellt, sondern auch dazu beitragen kann, Überholunfälle zu reduzieren.
Im Bereich von Arbeitsstellen längerer Dauer ist es oft erforderlich, den Verkehr auf die Gegenfahrbahn überzuleiten. Neben vermehrten Verkehrsbehinderungen durch erhöhte Stauanfälligkeiten führt dies auch zu einer deutlich gesteigerten Unfallhäufigkeit. Ziel des Vorhabens war es, eine vergleichende Bewertung von verschiedenen Verkehrsführungen in Arbeitsstellen längerer Dauer mit Überleitung auf die Gegenfahrbahn vorzunehmen. Hierbei sollten die Auswirkungen von Anschlussstellen und andere Besonderheiten innerhalb der Bereiche mit Gegenverkehrstrennung mit betrachtet werden. Des Weiteren sollte die Relevanz der Zulauf- und vor allem der Überleitungsbereiche im Hinblick auf die Verkehrssicherheit in Arbeitsstellen untersucht und die Übertragbarkeit bzw. Vergleichbarkeit der Ergebnisse im Verhältnis zum Bereich der Gegenverkehrstrennung geprüft werden. Im Laufe der Bearbeitung hat sich gezeigt, dass Leitschwellen kaum noch zur Gegenverkehrstrennung in Arbeitsstellen eingesetzt werden, sondern überwiegend transportable Schutzeinrichtungen. Daher lag für das ursprüngliche Ziel " eine statistisch tragfähige Bewertung des Sicherheitspotenzials von Leitschwellen in Arbeitsstellen als Gegenverkehrstrennungsmaßnahme im Vergleich zu transportablen Schutzeinrichtungen " ein zu geringes Datenkollektiv vor. Hinsichtlich der Sicherheitsbewertung lassen sich auf Basis der Ergebnisse u. a. folgende Kernaussagen festhalten: - Arbeitsstellen mit 3+1-Verkehrsführung sind sicherer als Arbeitsstellen mit 4+0- und 4+2 Verkehrsführung, - in Arbeitsstellen mit 3+1-Verkehrsführung werden erheblich weniger Fahrzeuginsassen bei Unfällen mit Personenschaden verletzt oder getötet als in 4+0-Arbeitsstellen, - zudem sind Arbeitsstellen mit einer zulässigen Höchstgeschwindigkeit von 60 km/h geringfügig sicherer als mit einer zulässigen Höchstgeschwindigkeit von 80 km/h. Die Ergebnisse der unterschiedlichen Untersuchungen haben gezeigt, dass ein reiner Vergleich von einzelnen Verkehrsführungen " ohne Berücksichtigung von weiteren Parametern wie die Fahrstreifenbreite oder das Vorhandensein von Anschlussstellen " nicht sonderlich aussagekräftig ist. Bei der Planung von Arbeitsstellen und der volkswirtschaftlichen Bewertung dieser müssen daher neben der Einrichtungsdauer alle relevanten Parameter betrachtet werden.
Zu Beginn des Jahres 2016 macht der Anteil der Pkws mit alternativem Antrieb rund 2% des Pkw-Gesamtbestandes aus. Der Bestand an Pkw mit alternativem Antrieb stieg auf rund 712.000 Fahrzeuge im Jahr 2016 (ein Plus von etwa 11% gegenüber 2013). Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland beurteilen zu können, initiierte die Bundesanstalt für Straßenwesen (BASt) im Auftrag des Bundesministeriums für Verkehr und digitale Infrastruktur (BMVI) schon im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Fahrzeugen mit alternativen Antriebsarten mit dem Ziel, die tatsächliche Umsetzung des technologischen Fortschritts in marktgängige Produkte zu verfolgen, frühzeitig Kenntnis über die Bestandsentwicklung zu erhalten sowie mögliche Fehlentwicklungen " insbesondere mit Blick auf die Verkehrssicherheit " zu identifizieren. Vor allem die Betrachtung des letzten Punktes soll die Möglichkeit schaffen, Vorschläge für eine sinnvolle Steuerung der Entwicklung leisten zu können. Nachfolgend werden in Kapitel 2 die technischen Entwicklungslinien des Marktes für Fahrzeuge mit alternativem Antrieb dargestellt. In den Kapiteln 3 und 4 werden der Bestand sowie das Unfallgeschehen näher betrachtet.
Unfälle schwerer Güterkraftfahrzeuge (sGkfz) werden regelmäßig thematisiert, insbesondere da durch den Größen- und Massenunterschied ein erhöhtes Gefahrenpotential für den Unfallgegner entsteht. Schwere Güterkraftfahrzeuge werden jedoch im Rahmen der polizeilichen Unfallaufnahme nicht separat codiert. Somit sind Informationen zum Unfallgeschehen dieser Fahrzeuge " im Rahmen der regelmäßigen Veröffentlichungen des Statistischen Bundesamtes " nicht ausreichend verfügbar. Mit der vorliegenden Untersuchung knüpft die Bundesanstalt für Straßenwesen (BASt) daher an die letzte Untersuchung zum Unfallgeschehen dieser Fahrzeuge aus dem Jahr 2003 an, um ein umfassenden Statusbericht zum Unfallgeschehen schwerer Güterkraftfahrzeuge zu geben. Anhand der polizeilichen Aufzeichnungen eines Unfalls besteht keine direkte Möglichkeit, schwere Güterkraftfahrzeuge als Beteiligte in der amtlichen Statistik abzugrenzen. Die zusätzlichen Angaben des Kraftfahrt-Bundesamtes (KBA) enthalten jedoch Informationen, mit deren Hilfe die in dieser Untersuchung verwendeten Gruppen gebildet werden können. Daher wird im ersten Schritt eine Abgrenzung dieser Fahrzeuge in der amtlichen Straßenverkehrsunfallstatistik durchgeführt. Anschließend wird die zeitliche Entwicklung von 2002 bis 2015 sowie die Struktur der Unfälle unter Beteiligung schwerer Güterkraftfahrzeuge im Jahr 2015 untersucht. Da die Struktur insbesondere von Art und Typ des Unfalles abhängig ist, werden aus den Verschneidungen von Unfallart und Unfalltyp Konstellationen erstellt. Der Großteil der Konstellationen wird zu drei Szenarien zusammengefasst, die abschließend im Detail untersucht werden. Im Ergebnis werden charakteristische Merkmale des Unfallgeschehens und der beteiligten Fahrer von schweren Güterkraftfahrzeugen herausgearbeitet. Im Jahr 2015 ereigneten sich 11.261 Unfälle mit Personenschaden unter Beteiligung eines sGkfz. Dies entspricht etwa 4 % aller Unfälle mit Personenschaden dieses Jahres in Deutschland. Bei Unfällen unter Beteiligung eines sGkfz verunglückten 15.635 Personen, das entspricht ebenfalls 4 % aller bei Unfällen Verunglückten. Jedoch wurden bei Unfällen unter Beteiligung eines sGkfz 524 Personen getötet, das sind 15 % aller bei Unfällen Getöteten. Dementsprechend ist die Unfallschwere mit 350 Getöteten oder Schwerverletzten pro 1.000 Unfälle mit Personenschaden deutlich höher als im Durchschnitt (233) aller Unfälle.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.