23 Deckeneigenschaften
Filtern
Erscheinungsjahr
- 2013 (5) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (3)
- Buch (Monographie) (1)
- Bericht (1)
Volltext vorhanden
- ja (5) (entfernen)
Schlagworte
- Deutschland (4)
- Germany (4)
- Measurement (4)
- Messung (4)
- Coefficient of friction (3)
- Conference (3)
- Griffigkeit (3)
- Konferenz (3)
- Oberflächentextur (3)
- On the spot accident investigation (3)
Institut
- Sonstige (4)
- Abteilung Straßenbautechnik (1)
Im Rahmen des Forschungsvorhabens "Absenkung der Produktions- und Verarbeitungstemperatur von Asphalt durch Zugabe von Bitumenverflüssigern", FE 07.203/2002/CRB, sind Langzeitbeobachtungen der eingerichteten Versuchsstrecken vereinbart. Hierzu wer-den die Strecken BAB A7 und B 106 nach zwei, vier und acht Jahren systematisch visuell und messtechnisch beurteilt. Die Ergebnisse werden als Ergänzungen zum Abschlussbericht dargestellt. Die vorliegende Ergänzung fasst den Zustand nach insgesamt 8-jähriger Liegezeit unter Verkehrsbelastung zusammen. Die visuelle Zustandserfassung fällt für beide Versuchsstrecken durchaus noch positiv aus. Die temperaturabgesenkt hergestellten Erprobungsabschnitte schneiden dabei - bis auf wenige Ausnahmen - auf beiden Strecken mit geringen Vorteilen gegenüber den Referenzstrecken ab. Die messtechnische Beurteilung bestätigt diesen Eindruck. Es wurden keine bedeutenden Abweichungen in der Längsebenheit festgestellt. Die ermittelten Spurrinnentiefen liegen auf beiden Strecken auf etwa gleichem, sehr niedrigem Niveau. Die Griffigkeit kann für beide Strecken als sehr gut beurteilt werden. Die absoluten Griffigkeitsbeiwerte liegen auf der B 106 mit einem SMA 0/8 S erwartungsgemäß höher als auf der BAB A7. An den aus Bohrkernen extrahierten Bindemitteln wurden Kenndaten ermittelt und den mit dem Endbericht veröffentlichten Ergebnissen gegenübergestellt. Die Daten sind hinsichtlich eines unterschiedlichen Alterungsverhaltens ausgewertet worden. Dabei wurde versucht, Vor- und Nachteile der Bindemittelvarianten zu erkennen und herauszuarbeiten.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
Gussasphalt ohne Abstreuung
(2013)
Bedingt durch die wachsende Problematik des Verkehrslärms ist die akustische Optimierung von Asphaltdeckschichten seit über 20 Jahren eine wichtige Aufgabenstellung in der Asphalttechnologie. Nach einem ersten Forschungsschwerpunkt auf offenporige Asphalte wurde anschließend der Fokus auf dichte Deckschichten gerichtet. Eine dieser neueren Konzepte ist die Bauweise Gussasphalt ohne Abstreuung, oder auch als Gussaphalt mit offenporiger Struktur bezeichnet. Als Abkürzung wird derzeit PMA (Porous Mastic Asphalt) verwendet. Die Grundidee dieser Bauweise besteht darin, die untere Zone der Deckschicht möglichst dicht, das heisst ähnlich einem Gussasphalt auszubilden, während sich an der Oberfläche eine offene Textur einstellt, die gemeinsam mit dem kleinen Größtkorn, gute akustische Eigenschaften zeigt. Erreicht wird dies durch eine spezielle Zusammensetzung des Mischguts mit einem großen Anteil grober Gesteinskörnungen, feiner Gesteinskörnungen, die auf 1 Millimeter begrenzt sind und einem abgesenkten Fülleranteil. Diese reduzierte Mörtelmenge führt zur gewünschten definierten Ausfüllung des Korngerüsts. Zur Überprüfung dieser These bieten sich Analysen mit Röntgen-Computertomographie an, die erlauben, die wahre Hohlraumverteilung in Probekörpern zu ermitteln. Die bei der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin durchgeführten Messungen zeigen das grundsätzliche Funktionieren der Bauweise. Bei genauer lokaler Betrachtung jedoch können größere Schwankungen detektiert werden, die bis zum Verlassen des Konzeptes führen können. Durchgehende Hohlraumstrukturen bis zur Unterlage sind dabei möglich, die sich auch auf die Oberflächengestalt auswirken. Die bautechnischen Ursachen sind noch nicht näher geklärt. In Frage kommen alle am komplexen Prozess Asphalteinbau beteiligten Parameter, die generell, auch beim herkömmlichen Einbau von Walzasphalt, zu Schwankungen führen. Die Messung der Oberflächeneigenschaften Griffigkeit, Ebenheit und Schallemission ergab ein insgesamt homogenes Verhalten des betrachteten Streckenabschnitts. Die Ermittlung des Schallpegels nach statistischer Vorbeifahrt zeigte für Pkw bei 120 km/h eine Minderung gegenüber dem Referenzpegel von 3 dB(A). Das Optimierungsziel - dichte Asphaltdeckschicht mit guten akustischen Eigenschaften - wurde erreicht. In der Erprobung der noch jungen Bauweise PMA stellt der betrachtete Abschnitt auf der BAB A 4 aufgrund seiner Länge und Verkehrsbelastung einen wichtigen Meilenstein dar, der sich bis zum jetzigen Zeitpunkt insgesamt vielversprechend verhielt. Vor einer Aufnahme als Regelbauweise in die ZTV Asphalt-StB müssen Fragestellungen in den Themenfeldern Laborverfahren, Mischgutkonzeption beziehungsweise Einbauhomogenität und Dauerhaftigkeit beantwortet werden. Für die Themenfelder sind bereits weitergehende Forschungsaktivitäten in Bearbeitung, die bis Anfang 2014 Ergebnisse erwarten lassen. Die Frage der Dauerhaftigkeit wird die Zeit selbst beantworten.