15 Umwelt
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (69)
- Wissenschaftlicher Artikel (46)
- Konferenzveröffentlichung (20)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (6)
- Bericht (5)
Schlagworte
- Deutschland (84)
- Germany (84)
- Forschungsbericht (62)
- Research report (60)
- Measurement (51)
- Messung (51)
- Emission (42)
- Pollutant (39)
- Air pollution (32)
- Lärm (32)
Die Bundesanstalt für Straßenwesen (BASt) betreibt einen Messquerschnitt an einem hochfrequentierten Autobahnquerschnitt an der BAB A4 und beobachtet an diesem Standort die zeitliche Entwicklung von Stickstoffdioxid NO2, von Partikeln PMx und von Ozon O3. In diesem Bericht werden die an der BAB A4 im Kalenderjahr 2019 aufgenommenen Messdaten dargestellt und analysiert.
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
Anforderungen, Zielkonflikte
(2019)
Um Sicherheit und Umweltverträglichkeit von Straßen- bzw. Kraftfahrzeugen zu gewährleisten, werden an die Gestaltung der Fahrzeuge technische Anforderungen gestellt. Es gibt Anforderungen durch den Gesetzgeber, die erfüllt werden müssen, um ein Fahrzeug in den Verkehr bringen zu dürfen. Darüber hinaus bestehen herstellerinterne Anforderungen an das Produkt, die über das vom Gesetzgeber geforderte Maß hinausgehen, um den Kundenwünschen und der Firmenphilosophie zu genügen. Und als dritter Punkt stellen auch Verbraucherschutz-Organisationen Kriterien auf, anhand derer sie die Eigenschaften der auf dem Markt befindlichen Fahrzeuge bewerten und die Fahrzeuge eingruppieren, was dann der Kundeninformation dient. Auch diese Anforderungen gehen über die des Gesetzgebers hinaus. Das Setzen der gesetzlichen Mindestanforderungen ist für die Fahrzeugtechnik mittlerweile jedoch nicht mehr einzelnen Staaten überlassen. Vielmehr sind die für die Genehmigung von Fahrzeugtypen einzuhaltenden Bedingungen international harmonisiert: Für die EU sind dies EU-Richtlinien oder EU-Verordnungen, die von der Europäischen Kommission in Brüssel vorgeschlagen werden. Für über die EU hinausgehende Staaten bzw. Regionen sind dies unter anderem Regelungen der UN, erstellt von der UN-Wirtschaftskommission für Europa (UNECE) in Genf.
Im Rahmen des Konjunktur-Pakets II beteiligt sich der Bund mit Finanzhilfen an der Lärmsanierung kommunaler Straßen. Grundlagen für die Förderung ist das "Gesetz zur Umsetzung von Zukunftsinvestitionen der Kommunen und Länder". Nach diesem Gesetz werden Investitionen im Bereich der kommunalen Straßen ausdrücklich auf Maßnahmen des Lärmschutzes beschränkt. In jedem Einzelfall muss die Lärmsituation verbessert werden und diese Verbesserung möglichst konkret dargelegt werden. Problematisch ist aber, dass es derzeit keine Straßenoberflächen gibt, denen eine lärmmindernde Wirkung bei innerorts üblichen Geschwindigkeiten zugewiesen ist. Geeignete Messverfahren zur Bestimmung der Minderungspegel stehen bereits zur Verfügung. An Verfahren zur Bewertung und Klassifizierung von Straßenoberflächen wird derzeit noch gearbeitet. Gleichwohl sind bereits vielversprechende Straßenoberflächen bekannt, die vermutlich als lärmarm (Minderung mindestens 2 dB(A)) klassifiziert werden können, wenn ein umfangreiches Messprogramm die Klassifizierung dieser Beläge rechtfertigt. Die RLS-90 werden derzeit überarbeitet. Insbesondere die Emissionsannahmen sind nach fast 20 Jahren veraltet und bedürfen einer Aktualisierung. Um zukünftigen Entwicklungen bei der Geräuschemission Rechnung tragen zu können, soll in den neuen RLS statt auf eine Tabelle mit Korrekturwerten DStrO auf ein Verfahren verwiesen werden, mit dem neue Werte ermittelt werden können. Dabei sollte auch eine Aufteilung nach Motor- und Antriebsgeräusch bzw. Reifen-Fahrbahn-Geräusch sowohl von Pkw als auch von Lkw vorgenommen werden.
Ziel des Forschungsvorhabens FE 02.272/2006/LRB "Bestimmung der Einfügungsdämpfung an verkürzten Lärmschutzwänden" war die Entwicklung und Erprobung eines neuartigen kostengünstigen Messverfahrens zur In-situ-Bestimmung der spektralen Einfügungsdämpfung einer Lärmschutzwand (Lsw). Das bisher eingesetzte Einzelmikrofon-Verfahren erfordert eine semi-infinite Lsw (ca. 200 m Länge). Damit sind erhebliche Kosten sowie gegebenenfalls Beeinträchtigungen des laufenden Verkehrs verbunden. Die Messung mit einem Mikrofonarray-Messsystem soll die Ermittlung der Einfügungsdämpfung an einer stark verkürzten Wand ermöglichen (ca. 20 m Länge). Durch die erhebliche Verringerung der notwendigen Mindestlänge der zu untersuchenden Testwand können die Baukosten um ein Vielfaches gesenkt werden.
Barrierewirkung vorhandener Verkehrswege vermindern : Querungshilfen sind sinnvoll und oft machbar
(2007)
Querungshilfen verbessern die Situation für die Tiere und sind daher dringend nötig. Wenn ein Verkehrsweg ausgebaut wird oder wenn Brücken erneuert oder umgewndelt werden, ergeben sich Möglichkeiten, Querungshilfen einzurichten. Um Lebensraumkorridore über mehrere Verkehrswege hinweg funktionsfähig zu machen bedarf es noch eines durchgreifenden Instrumentes.
Non-point sources of traffic-related pollution become a major concern as they " compared to the point-source inputs " are more difficult to be defined or controlled. It is crucial to evaluate the fraction of traffic-related contamination that is transported to the road surroundings as it could negatively impact soil, surface water and groundwater. This study describes two means through which pollutants leave the road to the surrounding environment. Three German motorways were selected (A4, A555, and A61), where runoff and deposits were analyzed to determine pollutant load moving into the roadside soil or into the drainage system. Each of the three motorways carries approximately 70,000 vehicles a day on 4 to 6 driving lanes; and they cover a broad range of truck participation in the total traffic load ranging from 5.4% to 19.8%. The three motorways represent several topographical and landscape features as forest with noise barrier and parallel as well as perpendicular orientation to the main wind direction. Sampling of runoff and deposition was done on monthly basis. Bulk deposition was collected in Bergerhoff vessels at two heights (1.5 m and 0.3 m above the ground) and in 1 m, 2.5 m, 5 m and 10 m distances from the road edge. The results showed that heavy metals as well as large amounts of mineral compounds are moving from the driving lanes into the roadside environment. This includes sodium from applying deicing salts in winter seasons, which could be found in soil, dust and water samples. Calcium and iron were also detected in almost comparable concentrations. The annual deposition flow (bulk deposition) measured at a height of 1.5 m was higher than the comparative values for urban areas and background measuring points. The spatial distribution of material deposition showed clear differences between the three motorways. The pollutant load in deposition measured near the ground surface was higher than those measured at 1.5 m above the land surface. At all three sites, a clear negative correlation between pollutant load and the distance from the roadside could be found. Nearly 90% of the concentration values of heavy metals in road runoff were below or in the range of the test values for seepage water in the German Soil Protection and Contamination Ordinance. The pH-values around 7 in runoff and adjacent soil provide a good retention capacity in the soil for the heavy metal input.
The road transport infrastructure is facing many challenges and the subsequent adaptation of the infrastructure is of utmost concern. These challenges are as follows: globalization, sustainability, technological and demographic change, an increase in goods transport and climate change. Various climate projections predict changing climatic parameters such as temperature, precipitation and wind speed for Germany. This could have severe impacts on road transport infrastructure as well as road traffic itself. At the Federal Highway Research Institute (Bundesanstalt für Straßenwesen), a strategy was developed to adapt roads and engineering structures to the impacts of climate change. The strategy "Anpassung der Straßenverkehrsinfrastruktur an den Klimawandel /Adaptation of road traffic infrastructure to climate change (AdSVIS)" currently comprises about 15 projects. Adaptation measures are to be developed for the identified risk areas and consequently their effectiveness has to be assessed.
Leiser Straßenverkehr 3
(2017)
Aus dem Verkehrsforschungsprogramm der Bundesregierung wurden seit 2001 die Verbundprojekte Leiser Straßenverkehr gefördert. In 2014 wurde das dritte und letzte Verbundprojekt erfolgreich abgeschlossen. Das Verbundprojekt Leiser Straßenverkehr 3 (LeiStra3) hatte sich als zentrales Ziel gesetzt, Maßnahmen zur Minderung des Straßenverkehrslärms in Ballungsräumen zu entwickeln, die dort aufgrund der hohen Bevölkerungsdichte besonders wirkungsvoll sind. Es wurden verschiedene Forschungsansätze verfolgt, die die Geräuschemission an der Lärmquelle nachhaltig reduzieren. Partner aus Wirtschaft und Wissenschaft haben in einer interdisziplinär angelegten Forschungsarbeit gemeinsam Lösungen erarbeitet, mit denen das Lärmminderungspotenzial von Reifen, Fahrzeug und Fahrbahn weiter ausgeschöpft werden kann. In allen Arbeitspaketen wurden zahlreiche Ergebnisse und Erkenntnisse gewonnen, die dazu beigetragen haben, die bestehende Technik zu verbessern, die Impulse zur Entwicklung neuer Technologien gesetzt haben und auf deren Basis das Technische Regelwerk fortgeschrieben wurde. rnDas Verbundprojekt "Leiser Straßenverkehr 3" wurde durch das Bundesministerium für Wirtschaft und Technologie unter dem Förderkennzeichen 19U10016 A-M gefördert. Der vorliegende Schlussbericht wurde auf der Grundlage der Originalberichte der Partner erstellt. Auf die Wiedergabe von Anhängen wurde in der vorliegenden Veröffentlichung verzichtet. Die Berichte der einzelnen Teilvorhaben sind ungekürzt bei der Technischen Informationsbibliothek (TIB) veröffentlicht.
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.