15 Umwelt
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (35)
- Wissenschaftlicher Artikel (13)
- Konferenzveröffentlichung (10)
- Bericht (4)
- Teil eines Buches (Kapitel) (1)
- Arbeitspapier (1)
Schlagworte
- Deutschland (44)
- Germany (44)
- Forschungsbericht (34)
- Research report (33)
- Measurement (19)
- Messung (19)
- Emission (15)
- Air pollution (13)
- Luftverunreinigung (13)
- Pollutant (13)
Institut
- Sonstige (64) (entfernen)
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
Ziel des Forschungsvorhabens FE 02.272/2006/LRB "Bestimmung der Einfügungsdämpfung an verkürzten Lärmschutzwänden" war die Entwicklung und Erprobung eines neuartigen kostengünstigen Messverfahrens zur In-situ-Bestimmung der spektralen Einfügungsdämpfung einer Lärmschutzwand (Lsw). Das bisher eingesetzte Einzelmikrofon-Verfahren erfordert eine semi-infinite Lsw (ca. 200 m Länge). Damit sind erhebliche Kosten sowie gegebenenfalls Beeinträchtigungen des laufenden Verkehrs verbunden. Die Messung mit einem Mikrofonarray-Messsystem soll die Ermittlung der Einfügungsdämpfung an einer stark verkürzten Wand ermöglichen (ca. 20 m Länge). Durch die erhebliche Verringerung der notwendigen Mindestlänge der zu untersuchenden Testwand können die Baukosten um ein Vielfaches gesenkt werden.
The road transport infrastructure is facing many challenges and the subsequent adaptation of the infrastructure is of utmost concern. These challenges are as follows: globalization, sustainability, technological and demographic change, an increase in goods transport and climate change. Various climate projections predict changing climatic parameters such as temperature, precipitation and wind speed for Germany. This could have severe impacts on road transport infrastructure as well as road traffic itself. At the Federal Highway Research Institute (Bundesanstalt für Straßenwesen), a strategy was developed to adapt roads and engineering structures to the impacts of climate change. The strategy "Anpassung der Straßenverkehrsinfrastruktur an den Klimawandel /Adaptation of road traffic infrastructure to climate change (AdSVIS)" currently comprises about 15 projects. Adaptation measures are to be developed for the identified risk areas and consequently their effectiveness has to be assessed.
Leiser Straßenverkehr 3
(2017)
Aus dem Verkehrsforschungsprogramm der Bundesregierung wurden seit 2001 die Verbundprojekte Leiser Straßenverkehr gefördert. In 2014 wurde das dritte und letzte Verbundprojekt erfolgreich abgeschlossen. Das Verbundprojekt Leiser Straßenverkehr 3 (LeiStra3) hatte sich als zentrales Ziel gesetzt, Maßnahmen zur Minderung des Straßenverkehrslärms in Ballungsräumen zu entwickeln, die dort aufgrund der hohen Bevölkerungsdichte besonders wirkungsvoll sind. Es wurden verschiedene Forschungsansätze verfolgt, die die Geräuschemission an der Lärmquelle nachhaltig reduzieren. Partner aus Wirtschaft und Wissenschaft haben in einer interdisziplinär angelegten Forschungsarbeit gemeinsam Lösungen erarbeitet, mit denen das Lärmminderungspotenzial von Reifen, Fahrzeug und Fahrbahn weiter ausgeschöpft werden kann. In allen Arbeitspaketen wurden zahlreiche Ergebnisse und Erkenntnisse gewonnen, die dazu beigetragen haben, die bestehende Technik zu verbessern, die Impulse zur Entwicklung neuer Technologien gesetzt haben und auf deren Basis das Technische Regelwerk fortgeschrieben wurde. rnDas Verbundprojekt "Leiser Straßenverkehr 3" wurde durch das Bundesministerium für Wirtschaft und Technologie unter dem Förderkennzeichen 19U10016 A-M gefördert. Der vorliegende Schlussbericht wurde auf der Grundlage der Originalberichte der Partner erstellt. Auf die Wiedergabe von Anhängen wurde in der vorliegenden Veröffentlichung verzichtet. Die Berichte der einzelnen Teilvorhaben sind ungekürzt bei der Technischen Informationsbibliothek (TIB) veröffentlicht.
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.
Anteile und zeitliche Verteilung von Oberflächenabfluss, Infiltration und Durchsickerung von Böschungen aus teilgesättigten Erddämmen infolge von Niederschlägen und Straßenabfluss sind bisher nur unzureichend bekannt. Für Straßenbauingenieure reicht das vorhandene Wissen über Wasser im Straßen-Erdbauwerk zur Beurteilung der Gebrauchstauglichkeit aus. Für die hydrologische Beurteilung der Durchsickerung im Hinblick auf den Boden- und Grundwasserschutz ist der heutige Wissensstand jedoch nicht ausreichend. Ziel des Projektes ist es, einen dringend benötigten Beitrag zur wirtschaftlichen und umweltverträglichen Verwertung von Ersatzbaustoffen im Erdbau zu leisten und bisher fehlende Beurteilungsmaßstäbe für den Boden- und Grundwasserschutz für die straßenbauspezifischen Gegebenheiten zu liefern. Zur Erreichung des Forschungsziels wurden in der Lysimeteranlage in Augsburg, Derchinger Straße, in acht Becken Böschungen eingebaut, die jeweils einen Ausschnitt aus einer Straßenböschung einschließlich eines Bankettstreifens darstellen. Zur Simulation von belastetem Bodenmaterial wurden dem Böschungsmaterial Schadstoffe zu dotiert. Zusätzlich wurden technische Sicherungsmaßnahmen eingebaut. Ergänzend zu den hydraulischen Größen Niederschlag, Menge von Sickerwasser und Oberflächenabfluss der Lysimeter wurden auch Konzentrationen der zu dotierten Schadstoffe (Cadmium, Kupfer und Cyanid} und weitere Parameter im Sickerwasser der Lysimeter und im Straßenabfluss bestimmt. Das dargestellte Projekt wurde gemeinsam durch die Hochschule Augsburg und die BASt von 2010 bis 2013 durchgeführt. Ein Anschlussprojekt ist derzeit in Bearbeitung.
Umweltgerechte Entwicklung von Verkehr und Infrastruktur - ein verkehrsträgerübergreifender Ansatz
(2016)
Im Expertennetzwerk des Bundesministeriums für Verkehr und digitale Infrastruktur (BMVI) sind seit 2016 die wissenschaftlichen Fachbehörden und Forschungseinrichtungen der Bundesregierung für den Straßenverkehr, die Binnen- und Seeschifffahrt, den Eisenbahnverkehr, die Luftfahrt und der Deutsche Wetterdienst zusammengeschlossen, um gemeinsam an der Entwicklung sicherer und umweltgerechter Verkehrssysteme zu arbeiten. Für die Zusammenarbeit wurden drei große Bereiche definiert, darunter das Themenfeld "Verkehr und Infrastruktur umweltgerecht gestalten". Hier werden zwischen 2016 und 2019 fünf Forschungsprojekte bearbeitet. Sie sind den Themen (1) Lebensraumvernetzung, (2) Biodiversität und Neobiota, (3) Verkehrslärm sowie (4/5) verkehrs- und infrastrukturbedingte stoffliche Umweltbelastungen gewidmet. Der Beitrag umreisst die mittel- und langfristigen Ziele des Expertennetzwerks im Bereich "Infrastruktur/Umwelt" und die Inhalte und Ziele der fünf Projekte der ersten Etappe der Zusammenarbeit.
Measuring and characterizing airborne particulate matter (PM) is an important research area because PM can lead to impacts on health and to visibility reduction, material damage and groundwater pollution. In regard to road dust, suspension and re-suspension and the contribution of non-exhaust PM to total traffic emissions are expected to increase as a result of predicted climate scenarios. European environmental regulations have been enforced to reduce exhaust particle emissions from road traffic, but little attention has been paid to reducing non-exhaust coarse particle emissions due to traffic. Therefore, a monitoring program for coarse PM has been initiated in early 2013 to assess the predicted increase in the abundance of non-exhaust particles. Particle sampling was performed with the passive-sampler technique Sigma-2. The subsequent single-particle analysis allows for characterization of individual particles, determination of PM size distribution, and calculation of PM mass concentrations. Two motorways n ear Cologne (Koeln), Germany were selected as sampling sites, and the experimental setup in the field was realized with a so-called twin-site method. The present study reports single-particle analysis data for samples collected between May 31, 2013 and May 30, 2014. Coarse PM, generated through multi-source mechanisms, consists of, e.g., tire-wear, soot aggregates, and mineral dust. The highest mass concentration occurs at both motorways in spring, and the observed PM mainly contains traffic-abrasion particles. The field measurements show that the minimum PM concentration was found in the 5 to 12-°C temperature range, whereas the maximum concentration was observed in both the "5 to 5-°C and the 12 to 24-°C ranges, in agreement with previous laboratory measurements. Correlation between super-coarse (d p 10"80 μm, geometric equivalent diameter) PM concentration and precipitation displays a significant increase in concentration with decreasing number of precipitation events (dry weather periods).
Urban runoff is known to transport a significant pollutant load consisting of e.g. heavy metals, salts and hydrocarbons. Interactions between solid and dissolved compounds, proper understanding of particle size distribution, dissolved pollutant fractions and seasonal variations is crucial for the selection and development of appropriate road runoff treatment devices. Road runoff at an arterial road in Augsburg, Germany, has been studied for 3.5 years. A strong seasonal variation was observed, with increased heavy metal concentrations with doubled and tripled median concentrations for heavy metals during the cold season. Correlation analysis showed that de-icing salt is not the only factor responsible for increased pollutant concentrations in winter. During the cold period, the fraction of dissolved metals was lower compared to the warm season. In road dust, the highest metal concentrations were measured for fine particles. Metals in road runoff were found to show a significant correlation to fine particles SS63 (<63 μm). Therefore, it is debatable whether treatment devices only implementing sedimentation processes provide sufficient removal rates.
Road authorities, freight, and logistic industries face a multitude of challenges in a world changing at an ever growing pace. While globalization, changes in technology, demography, and traffic, for instance, have received much attention over the bygone decades, climate change has not been treated with equal care until recently. However, since it has been recognized that climate change jeopardizes many business areas in transport, freight, and logistics, research programs investigating future threats have been initiated. One of these programs is the Conference of European Directors of Roads (CEDR) Transnational Research Programme (TRP), which emerged about a decade ago from a cooperation between European National Road Authorities and the EU. This paper presents findings of a CEDR project called CliPDaR, which has been designed to answer questions from road authorities concerning climate-driven future threats to transport infrastructure. Pertaining results are based on two potential future socio-economic pathways of mankind (one strongly economically oriented "A2" and one more balanced scenario "A1B"), which are used to drive global climate models (GCMs) producing global and continental scale climate change projections. In order to achieve climate change projections, which are valid on regional scales, GCM projections are downscaled by regional climate models. Results shown here originate from research questions raised by European Road Authorities. They refer to future occurrence frequencies of severely cold winter seasons in Fennoscandia, to particularly hot summer seasons in the Iberian Peninsula and to changes in extreme weather phenomena triggering landslides and rutting in Central Europe. Future occurrence frequencies of extreme winter and summer conditions are investigated by empirical orthogonal function analyses of GCM projections driven with by A2 and A1B pathways. The analysis of future weather phenomena triggering landslides and rutting events requires downscaled climate change projections. Hence, corresponding results are based on an ensemble of RCM projections, which was available for the A1B scenario. All analyzed risks to transport infrastructure are found to increase over the decades ahead with accelerating pace towards the end of this century. Mean Fennoscandian winter temperatures by the end of this century may match conditions of rather warm winter season experienced in the past and particularly warm future winter temperatures have not been observed so far. This applies in an even more pronounced manner to summer seasons in the Iberian Peninsula. Occurrence frequencies of extreme climate phenomena triggering landslides and rutting events in Central Europe are also projected to rise. Results show spatially differentiated patterns and indicate accelerated rates of increases.