Filtern
Erscheinungsjahr
- 2017 (28) (entfernen)
Dokumenttyp
- Buch (Monographie) (13)
- Konferenzveröffentlichung (11)
- Wissenschaftlicher Artikel (2)
- Bericht (2)
Schlagworte
- Bewertung (28) (entfernen)
Institut
Ziel des Forschungsvorhabens war die Untersuchung des Einflusses einzelner Zustandsparameter auf das Unfallgeschehen unter Berücksichtigung von Verkehrs- und Infrastrukturmerkmalen. Durch die Zusammenführung von Informationen aus den beiden Netzanalysesystemen "Zustandserfassung und -bewertung" (ZEB) und der (Empfehlungen für die) "Sicherheitsanalyse von Straßennetzen" (ESN) sollten Verbesserungspotenziale für die Optimierung des Sicherheitsmanagement der Straßeninfrastruktur abgeleitet werden. Daten aus drei Analyseländern für Bundesautobahnen sowie Bundes- und Landesstraßen wurden datentechnisch durch neu geschaffene Aggregations- und Auswerteverfahren auf ein gemeinsames Netzmodell aufbereitet. In Pilotanalysen wurden deskriptive Auswertungen des Unfallgeschehens und der Zustandsparameter durchgeführt. Verschiedene Analysemethoden für die Quantifizierung eines Zustandseinflusses auf das Unfallgeschehen wurden vergleichend gegenübergestellt und zentrale Randbedingungen (z. B. Abschnittslängen, Verteilungskennwerte der Zustandsparameter) definiert. Anhand multikriterieller Analyseansätze wurden Zusammenhänge zwischen Zustandsgrößen (z. B. Griffigkeit, Quer- und Längsebenheit), Infrastrukturparametern (z. B. Fahrstreifenanzahl, Längs- und Querneigung oder Kurvigkeitsäquivalent), den Verkehrsmengen und dem Unfallgeschehen modellhaft beschrieben. Für die Griffigkeit lassen sich signifikante und verallgemeinerbare Zusammenhänge mit Fahr- und Längsverkehrsunfälle auf Bundes- und Landesstraßen ableiten. Bei den übrigen untersuchten Zustandsgrößen " z. B. Ebenheit in Längs und Querrichtung " ergaben sich keine einheitlichen Ergebnisse. Aus den Modellen wurde ein allgemeingültiges Verfahren entwickelt, welches vermeidbare Unfallkosten pro Jahr für Veränderungen in der Griffigkeit bei gegebenen Infrastrukturgrößen abschätzt. Das dargestellte DV-Verfahren ermöglicht den bidirektionalen Datenaustausch zwischen der ZEB und der ESN und die Berücksichtigung der zusammengeführten Informationen im Rahmen des Erhaltungsmanagements.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Zur Sicherung der Leistungsfähigkeit der Verkehrsinfrastruktur in Deutschland soll im Bereich der kollektiven Verkehrsbeeinflussung in Zukunft das Werkzeug des prozessorientierten Qualitätsmanagements genutzt werden. Diese Forschungsarbeit hatte die Erarbeitung eines vollständigen Prozess- und Qualitätsmodells und praxistauglicher Handlungsempfehlungen für die verschiedenen Lebenszyklusphasen von Streckenbeeinflussungsanlagen (SBA) zum Ziel. Zu diesem Zweck wurden diverse Grundlagen zur Gestaltung eines auf SBA bezogenen Qualitätsmanagementsystems herangezogen. Das erarbeitete Prozessmodell umfasst 34 bewertungsrelevante Prozesse in den Lebenszyklusphasen Planung, Bau und Betrieb, einschließlich des unterstützenden Prozesses Wartung und Instandsetzung. Zur Identifikation von Lücken in der Qualitätssicherung der Prozesse wurde eine Fehlermöglichkeits- und -einflussanalyse (FMEA) durchgeführt. Anhand von Expertenwissen wurden Fehler und Fehlerursachen analysiert und die kritischsten Qualitätsprobleme zusammengestellt. Anhand der Ergebnisse des Prozessmodells wurde zur quantitativen Beschreibung der Auswirkungen möglicher Fehler ein Qualitätsmodell entwickelt. Auf Grundlage eines Bayes'schen Netzes wurden die Auswirkungen von Fehlern auf nachfolgende Prozesse im gesamten SBA-Lebenszyklus systematisch abgebildet. Das probabilistische Qualitätsmodell kann dabei außerdem als Diagnose-Werkzeug zur Untersuchung der Fehlerursachen von beobachteten Störungen einer SBA genutzt werden. Im Rahmen der Forschungsarbeit wurden anhand der Ergebnisse des Prozessmodells praxisorientierte, ressourcenschonende Handlungsempfehlungen abgeleitet und in einem Dokument für Planer und Betreiber von Streckenbeeinflussungsanlagen zusammengestellt. Zudem wurde eine Methode zur Abschätzung des Nutzens der Maßnahmen beschrieben, um die erforderlichen Investitionen zur Qualitätssicherung zu begründen. Zukünftige Forschungsarbeiten sollten sich im Zusammenhang mit der Adaption des Qualitätsmodells auf eine konkrete SBA insbesondere mit der Optimierung des Modells in Form von Anpassungen der Modelltopologie beschäftigen. Des Weiteren sollte untersucht werden, ob die in dieser Forschungsarbeit erarbeiteten Ergebnisse auf andere Typen von Verkehrsbeeinflussungsanlagen übertragbar sind.
Whiplash injuries are characterized by the high variability of its symptoms and by the subjectivity of its diagnosis, which sometimes leads to frauds perpetrated by victims of rear-end impacts. It is estimated that whiplash injuries cost annually about 10.000 million Euros in Europe. Therefore, the aim of this study was to investigate the influence of the dynamics of the accident in which the victim was involved in the probability of development of whiplash associated injuries. In the presented methodology, first an accident reconstruction is performed where the dynamics of the accident is determined. This is carried out using the software PC-Crash, police and insurance companies' data. Then biomechanical injuries criteria related with whiplash injuries are evaluated. For the evaluation of the probability of having whiplash injuries, the Neck Injury Criterion (NIC) of the victim and the mean acceleration of the vehicle were evaluated. Then, with medical reports, the results of the accident reconstruction are correlated with the reported injuries. Some examples are presented. The results obtained indicate that the study of the dynamics of the road accidents in which the victims were involved could be used as an auxiliary of the prognosis of whiplash injuries and is important for a precise diagnosis of this type of injuries.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
Die Bundesregierung hat zum 01.01.2012 einen deutschlandweiten Feldversuch mit Lang-Lkw gestartet. Die dafür erforderliche verkehrsrechtliche Grundlage wurde durch die LkwÜberlStVAusnV gegeben. Diese Verordnung schreibt u.a. die wissenschaftliche Begleitung des Feldversuches durch die BASt vor. Gründe für den Feldversuch sind u. a. vermutete Auswirkungen durch die Lang-Lkw auf die Verkehrssicherheit, den Verkehrsablauf, die Verkehrsqualität und auf die geometrische Gestaltung der Verkehrsanlagen. In der vorliegenden Untersuchung sollten entwurfstechnische Lösungsansätze für das Parken von Lang-Lkw auf Rastanlagen entwickelt und bewertet werden. Die Untersuchung beschränkt sich auf Rastanlagen im Zuge von Bundesfernstraßen. In den Untersuchungen wurde zwischen den Lang-Lkw bis L = 17,80 m (Typ 1) und den Lang-Lkw bis L = 25,25 m differenziert. Die differenzierte Bewertung beruht auf den Erkenntnissen, dass Typ 1 in Lkw-Parkstände passt. Die größeren Lang-Lkw mit bis zu L = 25,25 m passen nicht in die L = 21,96 m langen Schrägparkstände. Stellvertretend für die längeren Lang-Lkw wurde Typ 2 näher untersucht. Seine Schleppkurve ist vergleichsweise breit und sichert die Befahrbarkeit mit den übrigen Lang-Lkw auf einer Verkehrsanlage. Bei einer schlechten Befahrbarkeit der Verkehrsanlage mit Typ 2 wurde eine differenzierte Betrachtung mit den übrigen Lang-Lkw durchgeführt. Für die Untersuchung wurden verschiedene Fahrversuche durchgeführt, mit denen aber nicht alle Inhalte abgedeckt werden konnten. Aus diesem Grund wurden ergänzend Schleppkurven mit einer Simulationssoftware berechnet. Untersucht wurde auf Rastanlagen die Befahrbarkeit der Fahrgassen, Verzweigungen, Parkstände für Großraum- und Schwertransporte (GST), Schrägparken mit Ummarkierungen, Längsparkstände, telematisches Parken, Umbau von Trenninseln und temporäre Parkstandfreigaben. Die Ergebnisse der Untersuchungen zeigten, dass es kurzfristig möglich ist für Lang-Lkw Parkstände zur Verfügung zu stellen. Auf Längsparkständen können Lang-Lkw ohne bauliche Anpassung parken, wenn ausreichende Lücken vorhanden sind. Auch die temporäre abschnittsweise Freigabe von GST-Parkstreifen ist eine schnell umsetzbare Lösung. Die übrigen Lösungsansätze sind je nach vorhandenen Gegebenheiten auf den Rastanlagen mit mehr oder weniger Aufwand verbunden. Aus baulicher Sicht können Parkmöglichkeiten für Lang-Lkw auch auf bestehenden Rastanlagen umgesetzt werden. Aus rechtlicher Sicht sollte eine eindeutige Verkehrsregelung für die neue Fahrzeugart Lang-Lkw (zwischen Lkw und GST) festgelegt werden. Ein entsprechendes Zusatzzeichen ist dafür auch heute schon möglich. Die Untersuchung hat gezeigt, dass es verschiedene Ansätze zur Verbesserung der Parksituation von Lang-Lkw auf Rastanlagen gibt. Das als Problematik angeführte Parken mit Lang-Lkw ist jedoch als beherrschbar einzustufen, sofern die Anteile der Lang-Lkw am gesamten Straßengüterfernverkehr und der Parkbedarf der Lang-Lkw aufgrund der im Feldversuch beobachteten recht kurzen Fahrtweiten gering bleiben. Der künftige zusätzliche Parkstandbedarf für Lang-Lkw kann nur unter Realisierung solcher Maßnahmen (einzeln oder abgestuft als Maßnahmenkonzept) abgedeckt werden.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.