Im September 2013 wurde der 2. CEDR Call (Conference of European Directors of Roads, Call 2013), der eine Summe von ca. 5,3 Mio Euro umfasst, veröffentlicht. Im Rahmen der länderübergreifen europäischen Forschung waren fünf Themen der künftigen strategischen Forschungsplanung und dem anstehenden Forschungsbedarf durch Befragung der europäischen nationalen Straßenbauverwaltungen identifiziert worden: Energieeffizienz, Verkehrssicherheit, Alternde Infrastruktur, Straßen und Umwelt, Verkehrsmanagement. Im Rahmen von Workshops waren zuvor zu diesen fünf Themen "Descriptions of Research Needs" (DoRNs) erarbeitet worden, welche zusammen mit dem Call veröffentlicht wurden. Die wesentlichen Inhalte der DoRNS werden im Beitrag kurz beschrieben.
Mit dem Beitrag soll ein Überblick zum aktuellen Bearbeitungsstand der ZTV Ew-StB vermittelt werden. Insbesondere soll auf Neuerungen und Veränderungen hingewiesen und diese inhaltlich kurz beleuchtet werden. Hervorzuheben ist, dass das Regelwerk um die grabenlose Kanalsanierung erweitert wurde und zulässige Abweichungen beim Bau von Entwässerungseinrichtungen geändert wurden. Nach ca. 4 Jahren ist die Überarbeitung und Abstimmung nunmehr weitgehend abgeschlossen.
Die Straßenverkehrsinfrastruktur und der Straßenverkehr müssen sich künftig vielen Herausforderungen stellen. Zu nennen sind hier die Globalisierung, die Nachhaltigkeit, der Anstieg des Güterverkehrs und der technologische, demografische und klimatische Wandel. Die Straßenverkehrsinfrastruktur und der Straßenverkehr müssen sich den prognostizierten und projizierten Veränderungen anpassen. Die BASt betreut in ihrer Strategie "Anpassung der Straßenverkehrsinfrastruktur an den Klimawandel (AdSVIS)" bereits mehr als ein Dutzend Projekte. Diese Strategie soll dazu beitragen, die Verwundbarkeit gegenüber den Folgen des Klimawandels zu mindern bzw. eine leistungsfähige Straßenverkehrsinfrastruktur zu erhalten. Hierfür entscheidend sind nicht nur die durchschnittlichen Änderungen von klimatischen Parametern, sondern mehr noch das Auftreten von Extremwetterereignissen. Geringe Änderungen bei den Mittelwerten können sich aber in hohen Zunahmen bei der statistischen Verteilung der Extremwerte wie z. B. Hitzeperioden, Starkregen, Sturmböen äußern. Der zentrale Punkt der Anpassungsstrategie ist die Risikoanalyse wichtiger Güter- und Transitverkehrsachsen unter Einbeziehung von Seehäfen. Das Ziel dieses Projektes ist die Identifikation, Analyse und Bewertung der Risiken aus den projizierten Klimaänderungen für ausgewählte Streckenabschnitte im deutschen Teil des TEN-T (Transeuropäisches Netz Transport) in Anlehnung an die im ERA-NET ROAD Projekt RIMAROCC entwickelte Methodik. Hierfür werden für die relevanten meteorologischen Parameter Grenzwerte ermittelt, bei deren Überschreitung es für die Elemente der Straßenverkehrsinfrastruktur aus den Bereichen Erdbau, Entwässerung, Straßenbefestigungen, Ingenieurbau und Verkehrstechnik problematisch bzw. kritisch werden kann. Dabei werden nicht nur nach aktuellen Stand der Technik gefertigte Abschnitte des Straßennetzes betrachtet, sondern auch solche älterer Bauweisen und deren Vorkommen im Netz. Über die Fusion der Straßennetzdaten mit regionalisierten Klimaprojektionen werden schließlich die Lokalitäten mit prioritärem Anpassungsbedarf ermittelt. Anschließend werden für die identifizierten Risikobereiche erforderliche Anpassungsmaßnahmen entwickelt, erprobt und hinsichtlich ihrer Wirksamkeit bewertet. Da im Fokus die kostenintensiven Elemente der Straßenverkehrsinfrastruktur mit langer Nutzungsdauer wie Brücken und Straßengründungen stehen, müssen Anpassungsmaßnahmen bereits bei zeitnah anstehenden Erneuerungsarbeiten erfolgen, um die Folgenkosten der Klimaänderung zu senken. Das derzeit laufende Projekt "Risikoanalyse wichtiger Güter- und Transitverkehrsachsen unter Einbeziehung von Seehäfen" stellt eine erste Annäherung an den Aufbau eines Risikomanagements dar. Die hierbei verwendete RIMAROCC-Methodik muss dazu erweitert, weiterentwickelt und validiert werden. Erst dann kann die Risikoanalyse auf Netzebene durchgeführt und die erforderlichen Anpassungsprogramme aufgestellt werden.
Im Mittelpunkt der Überlegungen zu Perspektiven einer zeitgemäßen und sicherheitswirksamen Fahranfängervorbereitung steht die Absenkung des weiterhin hohen Anfangsrisikos bei Fahranfängern. Ausgehend von den positiven Erfahrungen mit dem Begleiteten Fahren ab 17 beauftragte das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) die Bundesanstalt für Straßenwesen (BASt) mit der Erarbeitung eines Rahmenkonzepts, in dem Entwicklungsperspektiven für weitere Verbesserungen der Vorbereitung von Fahranfängern und wissenschaftlich begründete Maßnahmenvorschläge für die Erhöhung der Fahranfängersicherheit formuliert werden. Zunächst werden die Aufgaben und die Vorgehensweise der Rahmenkonzepterarbeitung sowie die Kriterien für die Ableitung von Maßnahmenprioritäten skizziert. Ausgehend von den Erkenntnissen zur Entwicklung des Unfallrisikos im Verlauf der Fahrkarriere werden im Anschluss die maßgeblichen Ansatzpunkte zur verbesserten Gestaltung eines sicheren Übergangs in die Automobilität aufgezeigt. Zentrale Maßnahmenvorschläge des Rahmenkonzepts werden vorgestellt. Diese beziehen sich auf die Bekämpfung der maßgeblichen Ursachen des erhöhten Fahranfängerrisikos (Fahrerfahrungsdefizit und Einstellungsmängel), die Optimierung bestehender Fahranfängermaßnahmen und die verstärkte Erschließung von Technik und Wissenschaft für das Fahren lernen.
The practicability and feasibility of using alcohol ignition interlock devices has been discussed for more than 15 years in Germany. Thereby, judicial issues have been treated conversely. Consensus exists about the fact that the voluntary use of alcohol ignition interlocks is in all areas of possible use recommendable. Great reservation is shown concerning the operation of the devices for DUI (Driving Under Influence) offenders. Main doubts regard the missing legal base for application in such cases and potential circumvention attempts while the need of supportive psychological measures is unquestioned. In 2011, the Ministry of Transport, Building and Urban Affairs entered this topic in its newly released traffic safety programme as a matter of future research. Almost in parallel, the Federal Highway Research Institute (BASt) launched an alcohol ignition interlock project for DUI offenders. The study at hand aimed at developing a comprehensive programme concept for the use of alcohol ignition interlocks as additional measure to psychological rehabilitation for DUI offenders. Expert surveys serve as input for the establishment of a widely accepted innovative concept for nationwide implementation. By means of a pilot trial, the added value of using a combination of structural (alcohol interlock) and individual (psychological measure) intervention for DUI offenders to the existing countermeasure system should be studied. In addition, selection criteria for DUI offenders eligible for future programme participation should be defined. The majority of the experts evaluate the introduction of alcohol ignition interlocks as a good option to enhance traffic safety. The possibility of early psychological rehabilitation is emphasized in the process. Those who do not approve alcohol ignition interlock usage estimate the amount of offenders eligible for such programmes too small. The survey also revealed that legal regulations for issuing an alcohol interlock restricted licence to DUI offenders is missing. Hence, a possible amendment to the German Driving Licencing Regulation was developed within the project. Consultations with the Ministry of Transport, Building and Urban Affairs and the Ministry of Justice disclosed the need for a change of the road traffic law before an amendment to the existing regulations may be put into force. At least, the person responsible in the Ministry of Justice developed a proposal for the law section that needs revision. All in all, it became clear within the process of the project that a field trial in Germany is still a distant vision. Nevertheless, all institutions involved are motivated to deal with the matter further on in order to pave the way for a soon start of the pilot trial.
In dem Beitrag präsentieren die Autoren einige laufende und geplante Forschungsvorhaben der Bundesanstalt für Straßenwesen (BASt), die wesentliche Bestandteile der Forschungslinie (FL) Q5 "Innovationen: Von der Idee in die Praxis" der mittelfristigen Forschungsplanung der BASt darstellen. Bei den konkreten Projekten geht es um die Entwicklung eines geeigneten Bewertungsverfahrens für Innovationen, um das Sichten neuer Forschungsideen aus denen neue Forschungsvorhaben resultieren können, um Nutzung von numerischen Methoden für die Entwicklung neuer Baustoffe und Bauweisen, sowie um den Aufbau einer geeigneten Untersuchungsinfrastruktur.
Für die Instandsetzung von schadhaften Betonfahrbahnplatten mittels "Heben und/oder Festlegen" werden in zunehmendem Maße Injektionsmaterialien aus Kunststoff verwendet. Aktuell existieren für die Prüfung und Bewertung derartiger Materialien mittels straßenbauspezifischer Kennwerte jedoch noch keine hinlänglichen Erfahrungen und Prüfvorschriften. In Laborversuchen wurden nunmehr geeignete Prüfungen und Auswertalgorithmen entwickelt und zweckgerichtete Festigkeitskennwerte an ausgesuchten Materialien bestimmt sowie erste Anforderungswerte formuliert. Zudem wurden die Wirksamkeit und die Dauerhaftigkeit von Unterpressungen im Hinblick auf das verwendete Injektionsmaterial in Praxisversuchen überprüft. Aus den Ergebnissen der Tragfähigkeitsmessungen ließ sich vorerst folgern, dass durch das Unterpressen von Fahrbahnplatten die Tragfähigkeits- und Lagerungsbedingungen signifikant verbessert werden können. Unterschiede in der kurzfristigen Wirksamkeit - im Hinblick auf das verwendete Injektionsmaterial - konnten hierbei nicht explizit deduziert werden. Vielmehr zeigte sich, dass die Dauerhaftigkeit maßgeblich von den vorliegenden Randbedingungen, das heisst, faktisch von der richtigen Auswahl des Materials abhängt.
Die UNECE Regelung R58 regelt die Beschaffenheit und die Installation von Heckunterfahrschutzsystemen an schweren Güterkraftfahrzeugen, deren Ziel die Verbesserung der Kompabilität zwischen Pkw-Frontstrukturen und Lkw-Hecks ist. Dennoch verunglücken laut amtlicher Unfallstatistik allein in Deutschland rund 30 Pkw-Insassen in Heckauffahrunfällen auf Lkw tödlich, da diese Vorrichtungen hinsichtlich Einbauhöhe und Steifigkeit den Anforderungen des realen Unfallgeschehens nicht genügen. Das Ziel dieser Studie ist eine quantitative Abschätzung der möglichen Reduzierung der Verletzungsschwere mit Hilfe eines statistischen Modells, die durch eine Anpassung der geltenden Bestimmungen und die damit verbundenen technischen Veränderungen des bereits vorgeschriebenen Heckunterfahrschutzes zu erreichen wäre. In einer Nutzen-Kosten-Analyse wird die Wirtschaftlichkeit dieser Modifizierungen mit einem idealen Notbremsassistenten verglichen. Die Untersuchung orientiert sich dabei an den aktuell in der UN-ECE WP29/GRSG in Genf diskutierten Vorschlägen zur Anpassung der ECE-R58. Das verwendete ordinale Probit-Modell stellt einen Zusammenhang zwischen der Verletzungsschwere im auffahrenden PKW und erklärenden Größen her, in diesem Fall der kinetischen Energie des unterfahrenden Pkws und der strukturellen lnteraktion zwischen Lkw-Heck und Pkw-Front. Diese Maßnahmen könnten demnach 53 - 78% der Getöteten sowie 27 - 49% der Schwerverletzten bei diesen Unfallkonstellationen reduzieren, was pro Jahr 20 Getöteten und 95 Schwerverletzten entsprechen würde. Somit würde eine Modifikation einer bestehenden passiven Schutzmaßnahme an jährlich 100.000 neuzugelassenen Lkw und Anhängern bereits 20 Getötete adressieren. Im Vergleich dazu müssten jährlich 3 Millionen Pkw mit zusätzlicher Sensorik und Aktuatorik für einen idealen Notbremsassistenten ausgestattet werden, um im Idealfall alle Heckauffahrunfälle von Pkw auf andere Pkw oder Lkw und damit 53 Getötete zu vermeiden. Daher fällt auch das Nutzen-Kosten-Verhältnis deutlich zugunsten des verbesserten Heckunterfahrschutzes aus.
Im von der DG Home (CIPS Program) geförderten Projekt "SecMan " Security Manual for Road Infrastructures" wurde ein vierstufiges Verfahren zur Identifikation kritischer Straßeninfrastrukturen, ihre Bewertung hinsichtlich diverser von Menschen verursachter Gefahren sowie die Bestimmung effektiver Schutzmaßnahmen entwickelt. Diese Ergebnisse wurden in einem ganzheitlichen "best-practice" Handbuch zusammen getragen, welches einen trans-nationalen Sicherheitsmanagement-Ansatz für Betreiber und Eigentümer von Straßeninfrastrukturen in Europa ermöglicht. Im Folgenden wird die entwickelte Methodik vorgestellt, ausgehend von der Bewertung der Netzkritikalität über die Attraktivität und Vulnerabilität eines Bauwerks hin zu einer Bewertungsmethodik für die Auswahl geeigneter Schutzmaßnahmen.
Um die Sicherheit der Straßentunnel zu gewährleisten, werden mehr als 400 m lange Tunnel ständig durch eine Tunnelleitzentrale überwacht. Die dort eingehende Flut von Einzelinformationen, wie Kamerabilder und zahlreiche Sensordaten, muss permanent durch das Personal erfasst und beurteilt werden. Das Projekt ESIMAS (Echtzeit-Sicherheits-Management-System für Straßentunnel) wird neue Wege aufzeigen, um die Leitstellenmitarbeiter zu unterstützen. Auf Grundlage der Datenanalyse und -bewertung von ESIMAS können zukünftig sicherheitsrelevante Ereignisse, wie ein Brand im Tunnel, zuverlässig und rechtzeitig erkannt werden. Im Ernstfall soll ESIMAS dem Leitzentralenpersonal sowie den Einsatz- und Rettungsdiensten Handlungsempfehlungen zur Ereignisbewältigung zur Verfügung stellen. Auf Basis dieser Handlungsempfehlungen können Maßnahmen schnellstmöglich und gezielt durchgeführt werden. Der innovative Ansatz von ESIMAS besteht in der ganzheitlichen Betrachtung aller Einzelinformationen und ihrer automatischen Auswertung und Bewertung. Hierdurch ist eine schnellere Reaktion der Leitstelle zum Schutz der Verkehrsteilnehmer möglich.
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
Topics of the status report are: Road accidents in Germany " Socio-economic costs due to road traffic accidents in Germany " Vehicle population and road performance " Electromobility " Alternative power train technologies: market penetration and consequences. The following research subjects are presented: Safety of electric vehicles " Driving dynamics of electric propelled vehicles " New requirements for the periodic technical inspection of electric and hybrid vehicles " Forward looking safety systems " Periodic roadworthiness tests " Cooperative systems: integration of existing systems " Safety related traffic information " Urban space: User oriented assistance systems and network management " Automated driving " Study on camera-monitor-systems " Freight transport " BioRID TEG, dummy harmonization " Frontal impact and compatibility " Child safety " FlexPLI " GIDAS: a blueprint for worldwide in-depth road accident investigations " Druid: Driving under the influence of drugs, alcohol and medicines " Smoke and toxicity in bus fires.
There is a need to continue to set the right vehicle safety policy priorities in the future. Research has to point out the most cost efficient and safety relevant measures to further reduce the number of road traffic casualties. The overall development shows that the constant and rapid decrease in the number of road casualties slows down. New innovations need to enter the vehicle market soon, in order to continue the success achieved in the last decade. Priorities for vehicle safety are driven by safety and mobility demands. It is necessary to keep a strong lid on all aspects of elderly and vulnerable road users. The fraction of powered-two-wheelers (PTW) is a priority group. PTWs have a risk of being involved in an accident, 14times higher than that of a passenger car. However, the figures do also show that every second fatality is a car occupant. Therefore passenger car safety remains to be top priority. Heavy goods vehicles are overly represented in fatal accidents, addressing the need to make these vehicles more compatible with other road users. These facts highlight the necessity not only to increase vehicles" self protection, but also to make cars - and trucks - more compatible and safe. Cycling is a strongly increasing mode of transport. This is a further reason to demand better protection for cyclists and pedestrians from car design and car active and integrated safety systems. Another priority for future vehicle safety is related to demographics. It is less known that the purely demographic effect will be superimposed by an increasing wish of elderly people to be mobile. However, elderly people show deficits concerning their biomechanics. This emphasizes the need for better and more adaptive restraint systems, but also further technological challenges and demands for active safety systems. However, in order to progress, current technological limitations have to be overcome. Cost benefit considerations, but also consumer acceptance and desires, will drive this process.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
Police records about traffic accidents like used by IRTAD (International Road Traffic and Accident Database) and CARE (Community Road Accident Database) do not represent all road injuries. For instance, road accidents of bicyclists without a counterpart are usually not reported. Furthermore, IRTAD-like data contains hardly any information on injury outcome and accident circumstances. This information gap leads to an under-representation of the safety concerns of the most vulnerable road users like children and the elderly both in accident research and safety promotion. Injury registration for the European Injury Database (IDB), in turn, combines details of accident causation with diagnostic information that can be used to assess injury severity and long term consequences. The IDB is collecting data from hospital emergency department patients and is being implemented in a growing number of countries. In this article IDB results on mode of transport and injury outcome are presented from a sample of nine EU member states.
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
Do learner gain sufficient braking capabilities at the end of education for collision avoidance?
(2013)
The paper describes a test design to evaluate the braking behaviour in the course of the driver education. The results show that the braking capabilities increased during the driver education and the learning effects are the same for males and females. The evaluation limit is set to 6 m/s-². At the beginning of education, 50% of the drivers do not reach this limit, although the driver education car is equipped with an emergency brake assist, which is regularly installed in all vehicles since 2009. After the education, 100% of the drivers can reach the limit. The results are mapped to a collision avoidance scenario.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
A concept for Safe-Driving-Trainings with a focus on risky behavior and safety related attitudes has been evaluated. 519 participants have been tested before and after the training by means of a questionnaire with the topics: technical driving competence, awareness of risks, and propensity for anticipation. A control group (131 subjects) was used to check for the possibility of response artifacts. Three months later, 92 members of the treatment group and 25 members of the control group have been tested again. The results show significant positive changes in driving competence, risk awareness, and safety related attitudes, especially anticipation, due to the training. Compared to the control group the participants have become more risk aware and they regard of risk avoiding behavior as more important. The results show that this concept for Safe-Driving-Trainings has not only short-term but, more importantly, long-term positive effects on the safety-relevant attitudes and cognitions of young drivers.