Filtern
Erscheinungsjahr
- 2013 (153) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (82)
- Buch (Monographie) (43)
- Wissenschaftlicher Artikel (21)
- Teil eines Buches (Kapitel) (3)
- Bericht (2)
- Arbeitspapier (2)
Sprache
- Deutsch (77)
- Englisch (75)
- Mehrsprachig (1)
Schlagworte
- Deutschland (104)
- Germany (103)
- Konferenz (55)
- Conference (54)
- Research report (36)
- Forschungsbericht (35)
- Safety (29)
- Sicherheit (29)
- Accident (25)
- Bewertung (24)
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
The objective of the study is to measure the risk of pedestrian and bicyclist in urban traffic through an analysis of real-world accident data. The kinematics and injury mechanisms for both pedestrian and bicyclists are investigated to find the correlation of injury risks with injury related parameters. For this purpose, firstly 338 cases are selected as a sample from an IVAC accident database based on the In-depth Investigation of Vehicle Accident in Changsha of China. A statistic measurement of the fatality and serious injury risks with respect to impact speed was carried out by logistic regression analysis. Secondly, 12 pedestrian and 12 bicyclist accidents were further selected for reconstruction with MADYMO program. A comparative analysis was conducted based on the results from accident analysis and computer reconstructions for the injury risk, head impact conditions and dynamic response of pedestrians and bicyclists. The results indicate that bicyclists suffered lower risks of severe injuries and fatalities compared with pedestrians. The risks of AIS 3+ injury and fatality are 50% for pedestrians at impact speeds of 53.2 km/h and 63.3 km/h, respectively, while that for bicyclists at 62.5 km/h and 71.1 km/h, respectively. The findings could have a contribution to get a better understanding of pedestrians" and bicyclists" exposures in urban traffic in China, and provide background knowledge to generate strategies for pedestrian protection.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
Im Rahmen des Forschungsvorhabens "Absenkung der Produktions- und Verarbeitungstemperatur von Asphalt durch Zugabe von Bitumenverflüssigern", FE 07.203/2002/CRB, sind Langzeitbeobachtungen der eingerichteten Versuchsstrecken vereinbart. Hierzu wer-den die Strecken BAB A7 und B 106 nach zwei, vier und acht Jahren systematisch visuell und messtechnisch beurteilt. Die Ergebnisse werden als Ergänzungen zum Abschlussbericht dargestellt. Die vorliegende Ergänzung fasst den Zustand nach insgesamt 8-jähriger Liegezeit unter Verkehrsbelastung zusammen. Die visuelle Zustandserfassung fällt für beide Versuchsstrecken durchaus noch positiv aus. Die temperaturabgesenkt hergestellten Erprobungsabschnitte schneiden dabei - bis auf wenige Ausnahmen - auf beiden Strecken mit geringen Vorteilen gegenüber den Referenzstrecken ab. Die messtechnische Beurteilung bestätigt diesen Eindruck. Es wurden keine bedeutenden Abweichungen in der Längsebenheit festgestellt. Die ermittelten Spurrinnentiefen liegen auf beiden Strecken auf etwa gleichem, sehr niedrigem Niveau. Die Griffigkeit kann für beide Strecken als sehr gut beurteilt werden. Die absoluten Griffigkeitsbeiwerte liegen auf der B 106 mit einem SMA 0/8 S erwartungsgemäß höher als auf der BAB A7. An den aus Bohrkernen extrahierten Bindemitteln wurden Kenndaten ermittelt und den mit dem Endbericht veröffentlichten Ergebnissen gegenübergestellt. Die Daten sind hinsichtlich eines unterschiedlichen Alterungsverhaltens ausgewertet worden. Dabei wurde versucht, Vor- und Nachteile der Bindemittelvarianten zu erkennen und herauszuarbeiten.
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
Auf Basis des HBEFA 3.1 wurde das Emissionsmodul grundlegend überarbeitet. Die Emissionsberechnung kann nunmehr für die Bezugsjahre 2005 bis 2030 erfolgen. Aktualisiert wurden auch die PM10-Emissionsfaktoren für Aufwirbelung und Abrieb. Für freie (nicht überdeckelte Strecken) im guten Fahrbahnzustand sollten für den Leichtverkehr (LV) für alle Verkehrssituationen mit Tempolimit größer 50 km/h unabhängig vom Level of Service 30 mg/(km • Fzg) sowie für den Schwerverkehr (SV) 130 mg/(km • Fzg) verwendet werden. Für Tunnelstrecken werden für den LV 5 mg/ (km • Fzg) sowie für den SV 130 mg/(km • Fzg) vorgeschlagen. Für Straßen im schlechten Zustand sind diese Werte mit dem Faktor 2 zu multiplizieren. Für die Ermittlung der nicht motorbedingten PM2.5-Emissionen (Reifen-, Straße- und Bremsabrieb) wird der Ansatz aus CORINAIR vorgeschlagen. Kupplungsabrieb und Wiederaufwirbelung von Straßenstaub können nach derzeitigen Erkenntnissen vernachlässigt werden. Es wurde auch ein entsprechender Berechnungsvorschlag für Benzo(a)pyren-Emissionsfaktoren abgeleitet. Er basiert auf Emissionsfaktoren aus einer Studie des Schweizer Bundesamtes fuer Umwelt, Wald und Landschaft. Die bisher in MLuS integrierten gebietstypischen Vorbelastungswerte wurden anhand vorliegender Messdaten aus den Jahren 2000 bis 2006 aktualisiert. Neu wurden Vorbelastungsdaten für PM2.5 abgeleitet, da diese bisher in MLuS noch nicht vorgesehen waren. Die Änderungen der Vorbelastungswerte werden wie bisher tabellarisch in Form von Reduktionsfaktoren der Schadstoffbelastung angegeben. Die Abschätzungen der immissionsseitigen Wirkungen von Lärmschutzwänden- und -wällen wurden auf der Grundlage von mikroskaligen Modellrechnungen (MISKAM) quantifiziert und mit Windkanalmessungen bzw. Ergebnissen aus der Literatur abgeglichen. Nunmehr können Lärmschutzwände und Lärmschutzwälle bis 10 m berücksichtigt werden. Als NO-NO2-Konversionsmodell wird nunmehr ein vereinfachtes Chemiemodell auf Basis der Beschreibung der chemischen Umwandlung im Gleichgewicht der Stoffe NO2, NO und Ozon verwendet. Die Funktion zur Abschätzung der Überschreitungshäufigkeiten des NO2-Stundengrenzwertes wurde anhand von Messdaten der Jahre 2000 bis 2009 aktualisiert. Mit den zuvor erläuterten Ergebnissen wurde eine grundlegende Aktualisierung des PC-Programms durchgeführt. In Absprache mit dem zuständigen FGSV-Arbeitskreis wird das Programm "Richtlinien zur Ermittlung der Luftqualität an Straßen ohne oder mit lockerer Randbebauung" (RLuS) heißen. Die Onlinehilfe und das Handbuch zum Programm wurden ebenfalls aktualisiert. Abgeschlossen wurde auch im Rahmen des hier vorliegenden Projektes die Neuformatierung der RLuS-Broschüre.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland verfolgen, analysieren und mögliche negative Auswirkungen auf die Verkehrssicherheit zeitnah identifizieren zu können, hat die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Pkw mit alternativen Antriebsarten initiiert. Die Daten des vorliegenden Berichtes dokumentieren die Marktdurchdringung von Personenkraftwagen mit alternativen Antriebsarten und informieren über die Unfallbeteiligung von Fahrzeugen mit alternativem Antrieb bis 2011. Es hat sich gezeigt, dass Fahrzeuge mit Hybridantrieb nach wie vor ein starkes Marktwachstum aufweisen. Die Zuwachsrate ist nahezu auf dem gleichen hohen Niveau wie in den Vorjahren (ca. 28%, getypter Bestand). Bei den reinen Elektrofahrzeugen ist die Anzahl getypter Fahrzeuge sehr stark angestiegen, von 212 im Jahr 2010 auf 1880 im Jahr 2011. Der reale Bestand an Elektrofahrzeugen (inklusive ungetypter Fahrzeuge) hat sich demgegenüber von 2010 auf 2011 auf 4.541 Pkw verdoppelt. Dies deutet auf eine zunehmende Serienreife von Elektro-Kfz hin. Pkw mit alternativem Antrieb weisen 2011 (bis auf Gas) einen höheren Anteil an Unfällen innerorts auf als Pkw mit herkömmlichem Antrieb. Hybrid Fahrzeuge haben dabei eine erhöhte Beteiligungsquote innerorts von ca. 76%. Der relativ hohe Anteil von Innerortsunfällen von alternativ betriebenen Fahrzeugen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
It is commonly agreed that active safety will have a significant impact on reducing accident figures for pedestrians and probably also bicyclists. However, chances and limitations for active safety systems have only been derived based on accident data and the current state of the art, based on proprietary simulation models. The objective of this article is to investigate these chances and limitations by developing an open simulation model. This article introduces a simulation model, incorporating accident kinematics, driving dynamics, driver reaction times, pedestrian dynamics, performance parameters of different autonomous emergency braking (AEB) generations, as well as legal and logical limitations. The level of detail for available pedestrian accident data is limited. Relevant variables, especially timing of the pedestrian appearance and the pedestrian's moving speed, are estimated using assumptions. The model in this article uses the fact that a pedestrian and a vehicle in an accident must have been in the same spot at the same time and defines the impact position as a relevant accident parameter, which is usually available from accident data. The calculations done within the model identify the possible timing available for braking by an AEB system as well as the possible speed reduction for different accident scenarios as well as for different system configurations. The simulation model identifies the lateral impact position of the pedestrian as a significant parameter for system performance, and the system layout is designed to brake when the accident becomes unavoidable by the vehicle driver. Scenarios with a pedestrian running from behind an obstruction are the most demanding scenarios and will very likely never be avoidable for all vehicle speeds due to physical limits. Scenarios with an unobstructed person walking will very likely be treatable for a wide speed range for next generation AEB systems.
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
Bankette dienen im Wesentlichen der Verkehrssicherheit und dem Schadstoffrückhalt. Sie müssen dauerhaft standfest sein, damit abkommende Fahrzeuge, insbesondere schwere Lkw, nicht einsinken und verunfallen. Zum Grundwasserschutz müssen sie aber auch die Schadstoffe aus dem Straßenabfluss, der im Bankett versickert, zurückhalten. Der Schadstoffrückhalt im Bankett erfolgt vorwiegend durch mechanische Filtration. Diese wird vor allem durch die sandigen und schluffigen Kornfraktionen im Bankettmaterial bewirkt. Ist ihr Anteil aber zu hoch, nehmen die Standfestigkeit und die Tragfähigkeit ab. Es gilt, diese gegenläufigen Anforderungen an die Zusammensetzung von Bankettmaterial zu optimieren. Die Untersuchungsansätze und erste Ergebnisse der dazu beauftragten Forschung werden im Beitrag vorgestellt. Mit den Feinpartikeln aus dem Straßenabfluss und der Vegetation "wachsen" Bankette im Laufe der Jahre auf. Damit der Straßenabfluss nicht behindert wird und Aquaplaning auftritt, müssen Bankette regelmäßig geschält werden. Das bei dieser Reprofilierung anfallende Bankettschälgut ist grundsätzlich als Abfall einzustufen. Die dadurch bedingten Einschränkungen bei der Verwendung oder Verwertung sind in der "Richtlinie zum Umgang mit Bankettschälgut" beschrieben. Die dort aufgezeigten Möglichkeiten werden vorgestellt. Wenn das Bankettschälgut nicht innerhalb des Straßenbauwerks verbleiben kann, sollte es im Sinne der Ressourcenschonung verwertet werden. Bankettschälgut besteht zu circa 90 Masse-Prozent aus mineralischen Bestandteilen, die wieder für Bauzwecke genutzt werden können, wenn es durch eine geeignete Aufbereitung gelingt, die überwiegend pflanzlichen Anteile (Mähgutreste und Wurzeln) deutlich zu reduzieren. Aus einer Forschungsarbeit zu Kosten und Nutzen der Aufbereitung von Bankettschälgut werden der derzeitige Stand dargestellt und Perspektiven für eine werterhaltende Nutzung von Bankettschälgut aufgezeigt.
Annual report 2011/2012
(2013)
Traffic on German roads is increasing continuously. The research of the Federal Institute for Materials Research (BASt) is concerned with a road system that will be functioning well in the future, that is safe and economically and ecologically sustainable. Every two years, BASt reports on its tasks, research projects and selected administrative topics. The current report comprises the years of 2011 and 2012. On 151 pages, it provides an idea of current research about important topics of roads and traffic. The projects SKRIBT and SKRIBTPlus examined the behaviour of drivers in tunnels in hazardous situations. It was discovered that in situations like this many people often react inadequately and too late. The collected data were used to develop new concepts that improve behaviour in hazardous situations in tunnels. In recent years, new safety systems that improve braking behaviour in hazardous situations have been installed in vehicles. However, for end users it is difficult to compare different systems because they have no access to suitable assessments. The EU project ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety) in which BASt is involved as a key partner therefore developed a uniform procedure for assessment and legal questions. Many European countries agree: Alcohol, drugs and medication in road traffic constitute a safety risk on European roads. In order to gain new insights and to develop suitable countermeasures, the European Commission approved of the largest research project to improve road safety to date: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). This BASt-coordinated project took five years and involved institutes from 18 European countries. The result is a comprehensive stock taking and concrete suggestions on measures to be taken. A mayor part of the work of BASt also comprises extension and maintenance of the entire road infrastructure. The report "How will we make constructions in the future: Road construction without oil?" for instance examines the question how we will maintain and extend our roads in the future with resources becoming scarcer and more expensive. Furthermore, the campaign "on" the road plays a major part at BASt. For years there has been a shortage of parking spaces for trucks on federal highways. To remedy this situation, BAST has developed a new control approach: The so-called compact parking system increases capacities and uses them more effectively by parking trucks in a line according to their planned departure time.
From literature well-known analyzes on risks, hazards and causes of accidents of older drivers are amended by the present study in which a comparison of the specific features of accident causes of older car drivers (older than 60 years) and of younger car drivers (under 25 years) is conducted. Mainly the question is pursued if specific errors, mistakes and lapses are predominant in the two different age groups. The analysis system ACAS (Accident Causation Analysis System) used hereby consists of a sequential system of accident causation factors from the human, the technical and the infrastructural field, whereupon for this study the influence of the human features on the accident development in two different age groups is of interest. ACAS is both an accident model and an analysis and classification system, which describes the human participation factors of an accident and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. In five steps (categories) of a logical and temporal sequence the hierarchical system makes human functions and processes as determinants of accident causes identifiable. The methodology specifically focuses on the use in so-called "In-Depth" and "On-Scene" investigation studies. With the help of the system for each accident participant one or more of five hypotheses of human cause factors are formed and then specified by appropriate verification criteria. These hypotheses in turn are further specified by indicators in such manner that the coding of the causation factors by a code system meets the needs of database processing and are accessible to a quantitative data analysis. The first results of the descriptive comparison of the two age groups concern mainly differences in the functional levels "information admission/perception" (where the elderly drivers have more difficulties than the young ones) and "information processing/evaluation" (where the younger drivers show more problems). Concerning the cognitive function of "planning" the group of younger drivers seems to be more often involved in an accident because of excessive speed.
The effect of fatigue on driving has been compared to the effect of alcohol impairment in both driver performance and crash studies. However are crash characteristics and causation mechanisms similar in crashes involving fatigue to those involving alcohol when studied in the real world? This has been explored by examining data held in the EC project SafetyNet Accident Causation Database. Causation data was recorded using the SafetyNet Accident Causation System (SNACS). The focus was on Cars/MPV crashes and drivers assigned the SNACS code Alcohol or Fatigue. The Alcohol group included 44 drivers and the Fatigue group included 47. "Incorrect direction" was a frequently occurring critical event in both the Alcohol and Fatigue groups. The Alcohol group had more contributory factors related to decision making and the Fatigue group had more contributory factors relating to incorrect observations. This analysis does not allow for generalised statements about the significance of the similarities and differences between crashes involving alcohol and fatigue, however the observed differences do suggest that attempts to quantify the effect of fatigue by using levels of alcohol impairment as a benchmark should be done with care.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
In dem geltenden Regelwerk für Straßentunnel, der ZTV-ING, ist das derzeitige rechnerische Nachweisverfahren zum baulichen Brandschutz für Rechteckrahmenquerschnitte im Teil 5, Abschnitt 2 über ein vereinfachtes Nachweisverfahren mit Ansatz eines Temperaturgradienten von 50 K in Wand und Decke geregelt. Alternativ kann nach ZTV-ING ein "genauerer" rechnerischer Nachweis durchgeführt werden, der jedoch in der Praxis kaum angewendet wird, da hierzu bisher keine eindeutigen Regelungen zur Durchführung vorliegen. Es stellen sich insbesondere die Fragen, inwieweit über einen genaueren rechnerischen Nachweis Einsparpotenziale bei der Bewehrung gegenüber dem vereinfachten Nachweis vorliegen und welchen Einfluss eine verlängerte ZTV-ING-Kurve (55 Minuten Vollbrandphase statt 25 Minuten Vollbrandphase) auf die erforderlichen Bewehrungsgehalte hat. Im vorliegenden Forschungsvorhaben wurden die genaueren rechnerischen Nachweise für typische Rechteckrahmenquerschnitte von Straßentunneln (ein- und zweizellig) auf Grundlage des Eurocodes EN 1992-1-2 [4], "Allgemeines Rechenverfahren", durchgeführt. Aufgrund des deutlich unterschiedlichen Abplatzverhaltens von Beton ohne PP-Fasern und Beton mit PP-Fasern mit entsprechendem Einfluss auf das Tragverhalten im Brandfall wurden differenzierte Berechnungen durchgeführt. Die Annahmen für die Größe und den Zeitpunkt der Betonabplatzungen basieren auf den Auswertungen von Großbrandversuchen für Rechteckrahmen [10]. In zusätzlichen statischen Berechnungen wurde der Lastfall nach dem Brand mit Berücksichtigung der veränderten Baustoffeigenschaften durch die Brandeinwirkung nachgewiesen. Auf Grundlage der durchgeführten Berechnungen wurde ein Leitfaden mit Musterstatik für den genaueren rechnerischen Brandschutznachweis erstellt. Der Leitfaden mit Musterstatik soll bei der zukünftigen Dimensionierung von Rechteckkonstruktionen von Straßentunneln einen optimierten Brandschutznachweis mit einhergehenden Kostenoptimierungen gegenüber dem bisherigen vereinfachten Brandschutznachweis ermöglichen. Es hat sich gezeigt, dass der genaue rechnerische Nachweis des Brandfalls ein komplexes Berechnungsverfahren ist, das in der Praxis noch nicht erprobt ist. Auf Grundlage der Ergebnisse des genaueren rechnerischen Nachweisverfahrens wurde ein für die Praxis zweckmäßiges Berechnungsverfahren mit Vorgabe eines von der Bauteildicke abhängigen linearen Temperaturgradienten entwickelt. Voraussetzung für die Anwendung dieses Nachweisverfahrens sind vergleichbare Randbedingungen im Brandfall hinsichtlich Größe von Betonabplatzungen und Temperaturverteilungen im Bauteil, welche bei der Verwendung von Betonen mit PP-Fasern und entsprechenden Vorgaben an Rezeptur, Herstellung und Verarbeitung gesehen werden. Für eine Fortschreibung der ZTV-ING, Teil 5, Abschnitt 2, Nr. 10 "Baulicher Brandschutz" werden entsprechende Empfehlungen formuliert.
Die Bundesanstalt für Straßenwesen (BASt) hat 2009 eine Pilotstudie initiiert, an der sich vier Autobahnmeistereien aus Niedersachsen und Nordrhein-Westfalen beteiligt haben und deren Schlussbericht nun vorliegt. Grund dafür waren die immer stärker spürbaren psychischen Belastungen, die sich aus der gefährlichen und stressreichen Arbeit ergeben, die die Frauen und Männer in der orangefarbenen Arbeitskleidung auf der Straße verrichten. Bundesweit kommen nach Angaben des Bundesverbandes Deutscher Straßenwärter jedes Jahr acht bis zehn Straßenwärter ums Leben. Die Zahl der Verletzten ist hoch. Zu der Arbeit in unmittelbarer Nähe des fließenden Verkehrs auf der Fahrbahn oder im direkt angrenzenden Seitenbereich von Straßen und Autobahnen kommen Belastungen durch die immer knapper werdende Personalausstattung der Meistereien und den daraus resultierenden Überstunden hinzu, besonders im Winter. Diese ziehen oft gesundheitliche Einschränkungen und persönliche Krisen nach sich. Probleme, mit denen sich viele Kollegen allein gelassen fühlen. Der "Burn-out" ist praktisch schon vorprogrammiert. Das Ergebnis der Studie muss realistisch betrachtet werden. Die angebotenen Trainingseinheiten können die Belastungen der Straßenwärter, denen sie Tag für Tag ausgesetzt sind, zwar nicht weiter senken, aber sie können lernen, mit den daraus resultierenden Beanspruchungen deutlich besser fertig zu werden. Vor allem, indem sie miteinander und mit ihren Vorgesetzten sprechen und die Last des Einzelnen nötigenfalls auf mehrere Schultern verteilen.
An Landstraßen ist man in höherem Maße als an Autobahnen auf Kurzzeitzählungen zur Ermittlung der Bemessungsverkehrsstärke angewiesen, da das Dauerzählstellennetz hier weit weniger dicht ist und somit Informationen über stündliche Verkehrsmengen selten verfügbar sind. In diesem Forschungsvorhaben wurden Verfahren entwickelt, • um aus Kurzzeitzählungen die Bemessungsverkehrsstärke und den bemessungsrelevanten Schwerverkehrsanteil abzuleiten und • die aus Kurzzeitzählungen ermittelten Verkehrsmengen auf Folgejahre fortzuschreiben. Für die Ermittlung der bemessungsrelevanten Nachfragewerte wurde dabei unterschieden nach Abschnitten mit Belastungsspitzen, • die regelmäßig an Freitagnachmittagen auftreten, • aufgrund des Werktagsverkehrs und • aufgrund von Freizeit-, Ausflugs- oder Urlaubsverkehren. Für die Ermittlung der Bemessungsverkehrsstärke sind nicht alle Tage bzw. Wochen gleichermaßen geeignet. Je nach Abschnittstyp gibt es unterschiedlich geeignete Zählzeiten. Das Forschungsvorhaben zeigt eine Typisierung auf und weist nach, welche Strecken idealerweise zu welchen Zeiten gezählt werden sollten. Dabei werden sowohl Empfehlungen zur Wahl einer günstigen Zählwoche als auch " für Tageszählungen " zur Bestimmung der geeigneten Stunden gegeben. Als Schätzwert für die Bemessungsverkehrsstärke dient in allen Fällen der höchste während der Kurzzeitzählung gemessene Stundenwert. Die Empfehlung bzgl. der Fortschreibung von Zählungen auf Folgejahre ist dreigeteilt: 1. Geht die allgemeine Verkehrsentwicklung gegen Null, kann auf eine Fortschreibung verzichtet werden. 2. Liegt eine Verkehrsentwicklung vor, sollte die Fortschreibung mit einem ganglinienbasierten Verfahren vorgenommen werden. Die Veränderungsindizes für die gewünschten Fahrzeuggruppen sind aus dem entsprechenden Dauerzählstellenkollektiv abzuleiten. 3. Sind seit der letzten Zählung strukturelle Veränderungen eingetreten (z. B. Netzänderungen), sollte eine neue Erhebung durchgeführt werden.