Filtern
Erscheinungsjahr
- 2011 (8) (entfernen)
Dokumenttyp
Volltext vorhanden
- nein (8) (entfernen)
Schlagworte
- Germany (8) (entfernen)
Die Umfelddatenerfassung spielt in der Verkehrsbeeinflussung mittels Streckenbeeinflussungsanlagen (SBA) eine bedeutende Rolle. Auf Basis aktueller Verkehrs- und Umfelddaten (Witterungsdaten) werden auf Bundesfernstraßen Schaltungen zur Erhöhung der Verkehrssicherheit generiert. Mittels dynamischer Wechselverkehrszeichen (WVZ) werden die Verkehrsteilnehmer vor Umfeldbedingungen, die zu gefährlichen Situationen führen können, gewarnt. Umfeldbedingte Schaltungen können jedoch nur dann positiven Einfluss auf die Verkehrssicherheit erzielen, wenn die Anzeigen einer SBA durch die Verkehrsteilnehmer befolgt werden. Hierfür ist es erforderlich, dass die stationär erfassten Umfelddaten eine gute Qualität aufweisen und die aktuellen Umfeldbedingungen zeitnah im System abgebildet werden. Aufgrund der Wichtigkeit der Umfelddatenerfassung und des für die Praxis zu erwartenden Nutzens wurde im Arbeitskreis "Umfelddatenerfassung in Streckenbeeinflussungsanlagen" der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) die Notwendigkeit für den Aufbau eines Testfeldes für Systeme zur Erfassung der Umfeldsituation festgestellt und der Aufbau eines solchen Testfeldes beschlossen. Das im Jahr 2003 errichtete Testfeld bei München erlaubt, die Umfeldgrößen beziehungsweise die Sensoren zu deren Erfassung praxisnah und längerfristig zu untersuchen. Die Sensoren verschiedener Hersteller werden unter gleichen Bedingungen geprüft und bezüglich ihrer Eignung für den Einsatz in SBA eingestuft. Gleichzeitig besteht für die Hersteller die Möglichkeit, die Hard- und Software der Sensorik zu verbessern. Erfahrungen aus dem Testfeld und der Praxis erlaubten eine Ableitung von Anforderungen für Ausschreibung, Abnahme und Betrieb von Umfeldsensoren, welche im Hinweispapier der FGSV zusammen gefasst wurden. Die darin beschriebenen Plausibilitätskontrollen der erfassten Umfelddaten können in Verkehrszentralen direkt durchgeführt werden. Systematische und logisch/physikalische Fehler werden zeitnah und automatisch erkannt, unplausible und nicht nachvollziehbare Schaltungen können somit reduziert werden.
Zur Steuerung ihrer Forschungsaktivitäten hat die Bundesanstalt für Straßenwesen (BASt) die "Mittelfristige Forschungsplanung" festgeschrieben. Ab 2011 ist diese - orientiert an 19 Forschungslinien und 5 Querschnittthemen - Grundlage für die Forschungsthemen und -vorhaben der BASt für einen Zeitraum von fünf Jahren. Die Mittelfristige Forschungsplanung für die Jahre 2011 bis 2015 wurde von der BASt in Abstimmung mit ihrem Wissenschaftlichen Beirat erstellt. Die Themengebiete berücksichtigen die großen globalen und gesellschaftlichen Herausforderungen und deren mögliche Auswirkungen auf das Straßenwesen.
Aktuelle Erkenntnisse zur Feinstaub- und NOx-Problematik - Auswirkungen auf die Planungspraxis
(2011)
Durch die Limitierung verschiedener Luftschadstoffe zum Schutz der menschlichen Gesundheit und der Vegetation rückte in den letzten Jahren die Luftqualität an Straßen vielerorts in den Mittelpunkt des öffentlichen Interesses. Da Luftverunreinigungen kein nationales Problem darstellen und nicht an Landesgrenzen halt machen, wurden von der EU Luftqualitätsrichtlinien erlassen. Diese enthalten Grenz- und Zielwerte für verschiedene Luftschadstoffe. Nachdem in den vergangenen Jahren insbesondere die Einhaltung der Grenzwerte für Feinstaubpartikel PM10 Probleme bereitete und als verkehrspolitisch weitreichende Maßnahme Umweltzonen eingeführt wurden, werden zukünftig die Stickoxide in Ballungsräumen und in Straßennähe das größere Problem darstellen. Die Umsetzung der neuen Luftqualitätsrichtlinie 2008/50/EG in nationales Recht erfolgte im Jahr 2010 durch die Einführung der 39. Bundesimmissionsschutzverordnung (BImSchV), die die 22. BImSchV sowie die 33. BImSchV ablöst. Die geltenden Grenz-, Alarm- und Zielwerte, insbesondere PM10-Tages- und NO2-Jahresgrenzwert wurden bei der Überarbeitung bestätigt. Gegenüber den weiteren Regelungen haben sich Neurungen ergeben. Darüber hinaus wurde ebenfalls im Jahr 2010 das neue "Handbuch für Emissionsfaktoren" HBEFa 3.1 veröffentlicht. Dieses dient neben anderen auch dem "Merkblatt über Luftverunreinigungen an Straßen" (MLuS) als Datengrundlage für die Emissionsberechnungen. Eine Überarbeitung des MLuS ist daher notwendig geworden und wird derzeit in einem Projekt der Bundesanstalt für Straßenwesen (BASt) durchgeführt. Neben den neuen Emissionsfaktoren werden noch weitere Aktualisierungen vorgenommen.
Die Überarbeitung der RLS-90
(2011)
Die "Richtlinien für den Lärmschutz an Straßen", die RLS-90, sind 20 Jahre alt geworden. Grund genug, an eine Überarbeitung der Richtlinien zu denken. Die der RLS-90 zugrunde liegenden Annahmen der Geräuschemission sind identisch mit denen der RLS-81 und stammen aus den 1970er Jahren. Sie sind also bereits über 30 Jahre alt. Entsprechend hoch sind die Emissionsannahmen der RLS-90 für Lkw insgesamt und für Pkw bei niedrigen Geschwindigkeiten. Nur für Pkw bei hohen Geschwindigkeiten zeigt sich eine höhere Geräuschemission. Neben der Tabelle 4 der RLS-90 wird ein Verweis auf eine Tabelle mit D(Index StrO)-Werten diskutiert, die nach Fahrzeugart und Geschwindigkeitsbereich differenziert aktuelle Korrekturwerte vorhält. Eine wesentliche Voraussetzung hierfür ist, die Überarbeitung des "Verfahrens zur Messung der Geräuschemission von Straßenoberflächen", GEStrO. Die Geräuschemission einer überarbeiteten RLS-90 soll als längenbezogener Schallleistungspegel formuliert und damit kompatibel zu den modernen Richtlinien Schall 03, Ausgabe 2006 und NMPB 2008 sein. Mit einigen kleinen Änderungen im Ausbreitungsteil könnte eine überarbeitete RLS-90 Ende 2011 fertig gestellt sein.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Topics of this report are: Road accidents in Germany - Socio-economic costs due to road traffic accidents - Vehicle population and road performance " Automotive IT " Electromobility. The following research subjects are presented: Safety of electric vehicles - Forward looking safety systems - Cooperative systems - Safety related traffic information - Freight transport: Action plan freight transport and trial with longer trucks - Lane departure warning systems and Advanced emergency braking systems (AEBS) for heavy duty vehicles - Dummy harmonization " Compatibility - Child safety - Virtual testing - Driving under the influence of drugs, alcohol and medicines - Fire safety of buses - Milled shoulder rumble strips - Conspicuity of powered-two-wheelers - Automatically dipped high beam and rear view mirrors.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.