• search hit 2 of 8
Back to Result List

Field study on crash causal factors of chassis modifications

  • New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver ́s acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.

Export metadata

Additional Services

Share in Twitter Search Google Scholar
Author:Fabian Regh, Hermann Winner, Rainer Krautscheid
Document Type:Conference Proceeding
Date of Publication (online):2014/02/11
Year of first publication:2011
Contributing corporation:Technische Universität Darmstadt / Fachgebiet Fahrzeugtechnik
Release Date:2014/02/11
Tag:Analyse (math); Ausrüstung; Bremsung; Deutschland; Elektronisches Stabilitätsprogramm; Empfindlichkeit; Fahrstabilität; Fahrwerk; Konferenz; Messung; Pkw; Sicherheit; Versuch
Analysis (math); Braking; Car; Chassis; Conference; Electronic stability program; Equipment; Germany; Measurement; Safety; Sensitivity; Test; Vehicle handling
Volltext: http://www-nrd.nhtsa.dot.gov/pdf/esv/esv22/22ESV-000144.pdf
Source:Proceedings of the 22nd International Technical Conference on the Enhanced Safety of Vehicles, June 13-16, 2011, Washington, D.C.
Institutes:Abteilung Fahrzeugtechnik / Abteilung Fahrzeugtechnik
Sonstige / Sonstige
Dewey Decimal Classification:6 Technik, Medizin, angewandte Wissenschaften / 62 Ingenieurwissenschaften / 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
collections:BASt-Beiträge / ITRD Sachgebiete / 91 Fahrzeugkonstruktion
BASt-Beiträge / Tagungen / International Technical Conference on the Enhanced Safety of Vehicles (ESV) / 22nd ESV Conference 2011

$Rev: 13581 $