• search hit 5 of 14
Back to Result List

Development of a target propulsion system for ASSESS

  • The ASSESS project is a collaborative project that develops test procedures for pre-crash safety systems like Automatic Emergency Braking (AEB). One key criterion for the effectiveness of e.g. AEB is reduction in collision speed compared to baseline scenarios without AEB. The speed reduction for a given system can only be determined in real world tests that will end with a collision. Soft targets that are crashable up to velocities of 80 km/h are state of the art for these assessments, but ordinary balloon cars are usually stationary targets. The ASSESS project goes one step further and defines scenarios with moving targets. These scenarios define vehicle speeds of up to 100 km/h, different collision scenarios and relative collision speeds of up to 80km/h. This paper describes the development of a propulsion system for a soft target that aims to be used with these demanding scenario specifications. The Federal Highway Research Institute- (BASt-) approach to move the target is a self-driving small cart. The cart is controlled either by a driver (open-loop control via remote-control) or by a computer (closed-loop control). Its weight is limited to achieve a good crashability without damages to the test vehicle. To the extent of our knowledge BASt- approach is unique in this field (other carts cannot move at such high velocities or are not crashable). This paper describes in detail the challenges and solutions that were found both for the mechanical construction and the implementation of the control and safety system. One example for the mechanical challenges is e.g. the position of the vehicle- center of gravity (CG). An optimum compromise had to be found between a low CG oriented to the front of the vehicle (good for driveability) and a high CG oriented to the rear of the vehicle (good for crashability). The soft target itself which is also developed within the ASSESS project will not be covered in detail as this is work of a project partner. Publications on this will follow. The paper also shows first test results, describes current limitations and gives an outlook. It is expected that the presented test tools for AEB and other pre-crash safety systems is introduced in the future into consumer testing (NCAP) as well as regulatory testing.

Export metadata

Additional Services

Share in Twitter Search Google Scholar
Metadaten
Author:Patrick Seiniger, Oliver Bartels, Tobias Langner, Marcus Wisch
Document Type:Conference Proceeding
Language:English
Date of Publication (online):2014/02/10
Release Date:2014/02/10
Tag:Anfahrversuch; Antikollisionssystem; Entwicklung; Fahrstabilität; Fahrzeug; In Bewegung; Konferenz; Versuch
Collision avoidance system; Conference; Development; Impact test (veh); Moving; Test; Vehicle; Vehicle handling
Comment:
Volltext: http://www-nrd.nhtsa.dot.gov/pdf/esv/esv22/22ESV-000187.pdf
Source:Proceedings of the 22nd International Technical Conference on the Enhanced Safety of Vehicles, June 13-16, 2011, Washington, D.C.
Institutes:Abteilung Fahrzeugtechnik / Abteilung Fahrzeugtechnik
Dewey Decimal Classification:6 Technik, Medizin, angewandte Wissenschaften / 62 Ingenieurwissenschaften / 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
collections:BASt-Beiträge / ITRD Sachgebiete / 91 Fahrzeugkonstruktion
BASt-Beiträge / Tagungen / International Technical Conference on the Enhanced Safety of Vehicles (ESV) / 22nd ESV Conference 2011

$Rev: 13581 $