TY  - CONF
A1  - Siems, Sven Olav
A1  - Zander, Oliver
A1  - Leßmann, Peter
A1  - Gehring, Dirk-Uwe
A1  - Bortenschlager, Klaus
A1  - Barnsteiner, Karl
A1  - Ferdinand, Leonard
A1  - Hartlieb, Markus
A1  - Kramberger, David
A1  - Zeugner, Manfred
T1  - Evaluation of the effects of test parameters on the results of the lower legform impactor
N2  - The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
KW  - Bein (menschl)
KW  - Bewertung
KW  - Dummy
KW  - Knie (menschl)
KW  - Prüfverfahren
KW  - Reproduzierbarkeit
KW  - Veränderung
KW  - Anthropometric dummy
KW  - Evaluation (assessment)
KW  - Knee (human)
KW  - Leg (human)
KW  - Modification
KW  - Reproducibility
KW  - Test method
Y1  - 2007
UR  - https://bast.opus.hbz-nrw.de/frontdoor/index/index/docId/756
N1  - Volltext: http://www-nrd.nhtsa.dot.gov/pdf/esv/esv20/07-0009-O.pdf.
Außerdem beteiligt: BGS-Böhme und Gehring GmbH, PDB - Partnership for Dummy Technology and Biomechanics, BMW AG, Dr.-Ing. h.c. F. Porsche AG, DaimlerChrysler AG, Audi AG, Adam Opel AG.
ER  -